Runic Technology

SUPERVISOR 1 CHANNEL 2.93V 5SOT-23

IC VREF SERIES 2.5V SOT-23-3

电流增强型运算放大器

The RS3112 is a family of low-noise, low-drift, very high precision voltage references. These references are capable of both sinking and sourcing current, and have excellent line and load regulation.

The RS1430B is a 16-bit, sampling, analog-to-digital (A/D) converter specified for a supply voltage range from 2.7V to 5.5V. It requires very little power, even when operating at the full data rate. At lower data rates, the high speed of the device enables it to spend most of its time in the power-down mode. For example, the average power dissipation is less than 162µW at a 10kHz data rate. The RS1430B offers excellent linearity and very low noise and distortion. It also features a synchronous serial (SPI/SSI-compatible) interface and a pseudo-differential input. The reference voltage can be set to any level within the range of 0.1V to VDD. Low power and small size make the RS1430B ideal for portable and battery-operated systems. It is also a perfect fit for remote data-acquisition modules, simultaneous multichannel systems, and isolated data acquisition. The RS1430B is available in an MSOP8 package.

RS331是单通道比较器，RS393是双通道比较器，RS339是四通道比较器。这几种比较器都采用了开漏输出架构。其工作电压范围为1.8V~5.5V, 每通道功耗低至50μA (典型值)。

The RS82XP families of products offer low voltage operation and rail-to-rail input and output, as well as excellent speed/power consumption ratio, providing an excellent bandwidth (14MHz) and slew rate of 10V/us. The op-amps are unity gain stable and feature an ultra-low input bias current.

The RS846XP family of devices provide outstanding value for cost-sensitive applications, with features including low offset (±0.3mV, TYP), high slew rate (24 V/μs). Integrated EMI and RF filters, and operation across the full –40°C to 125°C enable the RS846XP devices to be used in the most rugged and demanding applications.

The RS846XP family of devices provide outstanding value for cost-sensitive applications, with features including low offset (±0.3mV, TYP), high slew rate (24 V/μs). Integrated EMI and RF filters, and operation across the full –40°C to 125°C enable the RS846XP devices to be used in the most rugged and demanding applications.

RS8452 (通用运算放大器)

The RS841X-Q1 families of products offer high voltage (32V) operation and rail-to-rail output, as well as excellent speed/power consumption ratio, providing an excellent bandwidth (1.2MHz) and slew rate of 0.67V/us. The op-amps are unity gain stable and feature an ultra-low input bias current.

RS6331P、 RS6332P、RS6334P 系列运算放大器可以在低电压下工作，采用轨对轨输出架构，拥有卓越的速度/功耗比，提供高带宽(1.1MHz)和0.5V/us的压摆率。该系列运算放大器具有单位增益稳定和超低输入偏置电流的特点。

The RS862X is a low noise, low offset voltage and high voltage operational amplifier, which can be designed into a wide range of applications. The RS862X has a gain-bandwidth product of 2MHz, a slew rate of 1.2V/μs and a quiescent current of 1mA at wide power supply range

The RS862X is a low noise, low offset voltage and high voltage operational amplifier, which can be designed into a wide range of applications. The RS862X has a gain-bandwidth product of 2MHz, a slew rate of 1.2V/μs and a quiescent current of 1mA at wide power supply range

The RS8538, RS8539 series of CMOS operational amplifiers use auto-zero techniques to simultaneously provide very low offset voltage (5μV max) and near-zero drift over time and temperature. This family of amplifiers has ultralow noise, offset and power.

The RS8538, RS8539 series of CMOS operational amplifiers use auto-zero techniques to simultaneously provide very low offset voltage (5μV max) and near-zero drift over time and temperature. This family of amplifiers has ultralow noise, offset and power.