All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| Nominal voltage | U o | 8.2 V (R i approx. 1 kΩ) |
| AC and DC characteristics | |
| Time delay before availability | t v | ≤ 5 ms |
| Environment and package | |
| Ambient temperature | 0 ... 40 °C (32 ... 104 °F) |
| Height | 32.5 mm |
| Height 32.5 mm Width 25 mm Length 20 mm | Height | 32.5 mm | Width | 25 mm | Length | 20 mm |
| Other | |
| Bending radius | > 10 x cable diameter |
| Bending radius > 10 x cable diameter Material PVC Core cross section 0.14 mm 2 Length L 2 m | Bending radius | > 10 x cable diameter | Material | PVC | Core cross section | 0.14 mm 2 | Length | L | 2 m |
| Connection type | cable |
| Core cross section | 0.14 mm 2 |
| Degree of protection | IP67 |
| Diameter | 1/8" (3.175mm) |
| Diameter 1/8" (3.175mm) | Diameter | 1/8" (3.175mm) |
| Equipment protection level Gb | PTB 99 ATEX 2128 X |
| Equipment protection level Gb PTB 99 ATEX 2128 X | Equipment protection level Gb | PTB 99 ATEX 2128 X |
| Housing material | PBT |
| Hysteresis | H | typ. 1 % |
| Inside diameter | 10 mm |
| Installation | non-flush |
| Length | L | 2 m |
| Material | PVC |
| Measuring cone | Carboloy/high grade steel |
| NAMUR | EN 60947-5-6:2000 IEC 60947-5-6:1999 |
| NAMUR EN 60947-5-6:2000 IEC 60947-5-6:1999 Standards EN IEC 60947-5-2 | NAMUR | EN 60947-5-6:2000 IEC 60947-5-6:1999 | Standards | EN IEC 60947-5-2 |
| Output type | NAMUR, bistable |
| Reverse polarity protection | reverse polarity protected |
| Standards | EN IEC 60947-5-2 |
| Switching function | Normally closed (NC) |
| Traverse A | 1 mA |
| Traverse B | 3 mA |
| Traverse B 3 mA Traverse A 1 mA | Traverse B | 3 mA | Traverse A | 1 mA |
| UL approval | cULus Listed Load Type: Resistive Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 8.2 V DC |
| Use in the hazardous area | see instruction manuals |
| Width | 25 mm |
Documents
No documents are linked to this part yet.