101550
在产G20 module with AS-Interface for digital inputs/outputs, 4 inputs and 3 outputs
全部替代型号
查看完整报告技术参数
| 电源 | |
|---|---|
| Auxiliary voltage (output) | U AUX | 20 ... 30 V DC PELV |
| Current | 2 A per output TB ≤ 40 °C: 6 A total TB ≤ 60 °C: OUT1+OUT2 max. 3 A, OUT3 max. 2 A |
| Current loading capacity | 500 mA , overload and short-circuit protected |
| Input current | ≤ 8 mA (limited internally) |
| Rated operating current | I e | ≤ 35 mA |
| Rated operating voltage | U e | 26.5 ... 31.6 V from AS-Interface |
| Supply | from external auxiliary voltage U AUX |
| Voltage | ≥ (U AUX - 0.5 V) |
| 交流 / 直流特性 | |
| Noise immunity | EN 61000-6-2:2005, EN 61326-1:2006, EN 62026-2:2013 |
| Signal delay | < 1 ms (input/AS-Interface) |
| 环境与封装 | |
| Ambient temperature | -25 ... 60 °C (-13 ... 140 °F) |
| Mounting | 2 clips with ∅ 8 mm drill hole |
| Storage temperature | -30 ... 85 °C (-22 ... 185 °F) |
| 其他 | |
| AS-Interface | EN 62026-2:2013 |
| AS-Interface specification | V3.0 |
| Cable length | 0.7 m (Inputs) , 1.5 m (X1, X2) |
| Connection | AS-Interface, AUX: Insulation piercing technology Yellow flat cable/black flat cable Inputs/outputs: M12 round plug connector in accordance with EN 61076-2-101 Inputs: LF type (4-pin, bushing contacts, screw lock, A-coded) Matching connector: LM type or similar Outputs: LF type (4-pin, bushing contacts, screw lock, A-coded) Matching connector: LM type or similar |
| Degree of protection | EN 60529:2000 |
| Directive 2014/30/EU | EN 62026-2:2013 |
| Directive 2014/30/EU EN 62026-2:2013 | Directive 2014/30/EU | EN 62026-2:2013 |
| Emitted interference | EN 61000-6-4:2007 |
| Fieldbus standard | EN 62026-2:2013 |
| ID1 code | 7 |
| ID2 code | E |
| ID code | A |
| Input | EN 61131-2:2007 |
| IO code | 7 |
| IO code 7 ID code A ID1 code 7 ID2 code E | IO code | 7 | ID code | A | ID1 code | 7 | ID2 code | E |
| LED AUX | ext. auxiliary voltage U AUX ; dual LED green/red green: voltage OK red: reverse voltage |
| LED FAULT | error display; LED red red: communication error or address is 0 red flashing: overload of sensor power supply or overload of outputs or external auxiliary voltage U AUX missing |
| LED IN | switching state (input); 4 LED yellow |
| LED OUT | Switching state (output); 3 LED yellow |
| LED PWR | AS-Interface voltage; green LED green: voltage OK flashing green: address 0 or overload of sensor power supply or overload of outputs or external auxiliary voltage U AUX missing |
| Mass | 260 g |
| MTBF | 110 a |
| Node type | A/B node |
| Note | The flat cable routing is designed for 100 actuation cycles |
| Number/Type | 4 Inputs for 3-wire sensors (PNP), DC |
| Profile | S-7.A.E |
| Required gateway specification | ≥ V2.1 |
| Switching point | according to DIN EN 61131-2 0 (undamped) ≤ 0.5 mA 1 (damped) ≥ 2.0 mA |
| UL File Number | E223772 "For use in NFPA 79 Applications only" |
器件图片
技术资料
该型号暂未收录资料。