103838
在产Female connector M12 straight X-coded 8-pin, Cat6A, shielded, for cable diameter 5.5 - 9 mm, field-attachable, insulation displacement connection
全部替代型号
查看完整报告技术参数
| 电源 | |
|---|---|
| Operating current | I B | max. 0.5 A |
| Operating voltage | U B | max. 50 V AC / 60 V DC |
| 环境与封装 | |
| Ambient temperature | -40 ... 85 °C (-40 ... 185 °F) |
| 其他 | |
| Body | Zinc diecast, nickel-plated / brass, nickel-plated |
| Coding | X-coded |
| Component category | CAT6A (IEC 11801, EN 50173) |
| Connection | socket |
| Connection socket Construction type M12 Style straight Locking screw connection Number of pins 8 Coding X-coded Customization suitable for wall bushing | Connection | socket | Construction type | M12 | Style | straight | Locking | screw connection | Number of pins | 8 | Coding | X-coded | Customization | suitable for wall bushing |
| Construction type | M12 |
| Contact resistance | max. 5 MΩ |
| Contact surface | Au |
| Core cross section | 0.1 ... 0.34 mm 2 / 27 ... 22 AWG |
| Customization | suitable for wall bushing |
| Degree of protection | EN 60529 |
| Fieldbus standard | IEEE 802.3an 10GBASE-T |
| Insulation resistance | min. 100 MΩ |
| Locking | screw connection |
| Mass | 48.25 g |
| Mating cycles | min. 100 |
| Number of pins | 8 |
| Plug connection | connector M12 x 1 : IEC 61076-2-109 |
| Pollution degree | 3 |
| Screw connection | Zinc diecast, nickel-plated |
| Screw connection Zinc diecast, nickel-plated Body Zinc diecast, nickel-plated / brass, nickel-plated Contact surface Au | Screw connection | Zinc diecast, nickel-plated | Body | Zinc diecast, nickel-plated / brass, nickel-plated | Contact surface | Au |
| Sheath diameter | 5,5 ... 9 mm |
| Sheath diameter 5,5 ... 9 mm Core cross section 0.1 ... 0.34 mm 2 / 27 ... 22 AWG | Sheath diameter | 5,5 ... 9 mm | Core cross section | 0.1 ... 0.34 mm 2 / 27 ... 22 AWG |
| Shielding | via Body |
| Style | straight |
| Tightening torque | 0.6 Nm |
| Tightening torque 0.6 Nm Tool installation hexagon nut SW = 19 mm Mating cycles min. 100 Shielding via Body | Tightening torque | 0.6 Nm | Tool installation | hexagon nut SW = 19 mm | Mating cycles | min. 100 | Shielding | via Body |
| Tool installation | hexagon nut SW = 19 mm |
| Transmission technology | suitable for PoE+ Power over Ethernet IEEE 802.3at |
| Volume resistance | max. 15 mΩ |
器件图片
技术资料
该型号暂未收录资料。