120211
在产HF RFID read/write device, ISO 15693, for IDENT<i>Control</i>
全部替代型号
查看完整报告技术参数
| 电源 | |
|---|---|
| Current consumption | ≤ 700 mA |
| Supply | from the IDENTControl |
| 交流 / 直流特性 | |
| Operating frequency | 13.56 MHz |
| 环境与封装 | |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) (Operation with nontransmission periods, adjustable) -25 ... 55 °C (-13 ... 131 °F) (Continuous transmission mode) |
| Directive 2011/65/EU (RoHS) | IEC/EN 63000 |
| Directive 2011/65/EU (RoHS) IEC/EN 63000 | Directive 2011/65/EU (RoHS) | IEC/EN 63000 |
| Height | 40 mm |
| Height 40 mm Width 80 mm Length 80 mm | Height | 40 mm | Width | 80 mm | Length | 80 mm |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| 其他 | |
| ACMA approval | CERT-7285 |
| Connection | connector M12 x 1 |
| Degree of protection | EN 60529 |
| Directive 2014/53/EU | EN 301489-1 EN 301489-3 EN 300330 EN 62368-1 EN 50364 |
| Directive 2014/53/EU EN 301489-1 EN 301489-3 EN 300330 EN 62368-1 EN 50364 | Directive 2014/53/EU | EN 301489-1 EN 301489-3 EN 300330 EN 62368-1 EN 50364 |
| Distance between two heads | Multiplex on: ≥ 100 mm Multiplex off: ≥ 750 mm |
| Distance between two heads Multiplex on: ≥ 100 mm Multiplex off: ≥ 750 mm | Distance between two heads | Multiplex on: ≥ 100 mm Multiplex off: ≥ 750 mm |
| Encapsulation compound | WEVO 403FL/300 |
| FCC approval | This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. |
| Housing | PA 6.6 |
| Housing PA 6.6 Encapsulation compound WEVO 403FL/300 | Housing | PA 6.6 | Encapsulation compound | WEVO 403FL/300 |
| IC approval | This device complies with Industry Canada licence-exempt RSS standard(s) and with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. |
| KCC approval | R-R-PF1-IQH3-FP-V1 |
| LED blue | Transmission mode |
| LED green | Power on |
| LED red | status display |
| LED yellow | Read/write operation successful |
| Length | 80 mm |
| Mass | 385 g |
| MIC approval | AC-25117 |
| MTBF | 97 a (Operation at +40 °C) |
| Radio approval | USA: Contains FCC ID IREIQR3FP Canada: Contains IC 7037A-IQR3FP |
| Read distance | 0 ... 300 mm (see manual) |
| Read distance 0 ... 300 mm (see manual) Write distance 0 ... 300 mm (see manual) Width max. 300 mm | Read distance | 0 ... 300 mm (see manual) | Write distance | 0 ... 300 mm (see manual) | Width | max. 300 mm |
| RFID | ISO/IEC 15693-2 ISO/IEC 15693-3 ISO/IEC 18000-3 |
| Transfer rate | 26 kBit/s |
| UL approval | E468231 cULus Listed, Class 2 Power Source, Type 1 enclosure |
| Width | max. 300 mm |
| WPC approval | ETA-SD-20230807834 |
| Write distance | 0 ... 300 mm (see manual) |
器件图片
技术资料
该型号暂未收录资料。