120212

在产

HF RFID read/write device with IO-Link in accordance with ISO 15693

全部替代型号

技术参数

电源
Current consumption	max. 700 mA ( NOTE: Check the power supply capabilities at the port of the master and wire gauge of the connection cable in order to assure stable communication. )
Operating voltage	U B \| 18 ... 30 V DC (IO-Link)
交流 / 直流特性
Operating frequency	13.56 MHz
环境与封装
Ambient temperature	-25 ... 70 °C (-13 ... 158 °F) (Operation with nontransmission periods, adjustable) -25 ... 55 °C (-13 ... 131 °F) (Continuous transmission mode)
Directive 2011/65/EU (RoHS)	IEC/EN 63000
Directive 2011/65/EU (RoHS) IEC/EN 63000	Directive 2011/65/EU (RoHS) \| IEC/EN 63000
Height	40 mm
Height 40 mm Width 80 mm Length 80 mm	Height \| 40 mm \| Width \| 80 mm \| Length \| 80 mm
Storage temperature	-40 ... 85 °C (-40 ... 185 °F)
其他
ACMA approval	CERT-7286
Communication interface	IEC 61131-9 / IO-Link V1.1.3
Compatible master port type	Class A Class B
Connection	connector M12 x 1
Data transfer rate	COM3 (230.4 kbits/s)
Degree of protection	EN 60529
Device ID	4195073 (0x400301)
Device profile	Identification and Diagnosis - I&D
Directive 2014/53/EU	EN 301489-1 EN 301489-3 EN 300330 EN 62368-1 EN 50364
Directive 2014/53/EU EN 301489-1 EN 301489-3 EN 300330 EN 62368-1 EN 50364	Directive 2014/53/EU \| EN 301489-1 EN 301489-3 EN 300330 EN 62368-1 EN 50364
Distance between two heads	≥ 750 mm
Distance between two heads ≥ 750 mm	Distance between two heads \| ≥ 750 mm
Encapsulation compound	WEVO 403FL/300
FCC approval	This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Housing	PA 6.6
Housing PA 6.6 Encapsulation compound WEVO 403FL/300	Housing \| PA 6.6 \| Encapsulation compound \| WEVO 403FL/300
IC approval	This device complies with Industry Canada licence-exempt RSS standard(s) and with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Interface type	IO-Link
IO-Link revision	1.1
KCC approval	R-R-PF1-IQT3-FP-IO-V1
LED blue	Transmission mode
LED green	Solid green: Ready for operation, no IO-Link communication Flashing green (1 Hz): IO-Link operation
LED red	status display
LED yellow	Read/write operation successful
Length	80 mm
Mass	385 g
MIC approval	AC-24025
Min. cycle time	4 ms
MTBF	90 a (Operation at +40 °C)
Process data	Input 32 Byte Output 32 Byte
Radio approval	USA: Contains FCC ID IREIQR3FP Canada: Contains IC 7037A-IQR3FP
Read distance	0 ... 300 mm (see manual)
Read distance 0 ... 300 mm (see manual) Write distance 0 ... 300 mm (see manual) Width max. 300 mm	Read distance \| 0 ... 300 mm (see manual) \| Write distance \| 0 ... 300 mm (see manual) \| Width \| max. 300 mm
RFID	ISO/IEC 15693-2 ISO/IEC 15693-3 ISO/IEC 18000-3
SIO mode support	no
Transfer rate	26 kBit/s
UL approval	E468231 cULus Listed, Class 2 Power Source, Type 1 enclosure
Vendor ID	1 (0x0001)
Width	max. 300 mm
WPC approval	ETA-SD-20230908020
Write distance	0 ... 300 mm (see manual)

器件图片

实物照片 · 产品库

技术资料

该型号暂未收录资料。