全部替代型号
查看完整报告技术参数
| 电源 | |
|---|---|
| No-load supply current | I 0 | ≤ 50 mA |
| Operating voltage | U B | 10 ... 30 V DC , ripple 10 % SS |
| Rated operating current | I e | 200 mA , short-circuit/overload protected |
| Voltage drop | U d | ≤ 2.5 V |
| 交流 / 直流特性 | |
| Repeat accuracy | ≤ 0.5 % of switching point |
| Response delay | approx. 150 ms |
| Switching frequency | f | ≤ 2.7 Hz |
| Transducer frequency | approx. 175 kHz |
| 环境与封装 | |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Height | 80 mm |
| Height 80 mm Width 80 mm Length 34 mm | Height | 80 mm | Width | 80 mm | Length | 34 mm |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Temperature influence | ± 1 % of full-scale value |
| 其他 | |
| Adjustment range | 90 ... 2000 mm |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Common mode operation | max. 30 Hz |
| Common mode operation max. 30 Hz Multiplex operation ≤ 30/n Hz, n = number of sensors | Common mode operation | max. 30 Hz | Multiplex operation | ≤ 30/n Hz, n = number of sensors |
| Connection type | Connector plug M12 x 1 , 5-pin |
| Dead band | 0 ... 60 mm |
| Default setting | Switch point A1: 90 mm , Switch point A2: 2000 mm , wide sound lobe |
| Degree of protection | IP54 |
| Housing | ABS |
| Housing ABS Transducer epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT | Housing | ABS | Transducer | epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT |
| LED green | solid green: Power on |
| LED red | normal operation: "fault" program function: no object detected |
| LED yellow | solid: switching state switch output flashing: program function |
| Length | 34 mm |
| Mass | 140 g |
| Multiplex operation | ≤ 30/n Hz, n = number of sensors |
| Output type | 1 switching output E5, PNP NO/NC, programmable |
| Range hysteresis | H | 1 % of the set operating distance |
| Sensing range | 60 ... 2000 mm |
| Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 |
| Standards EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 | Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 |
| Standard target plate | 100 mm x 100 mm |
| Synchronization | bi-directional 0 level -U B ...+1 V 1 level: +4 V...+U B input impedance: > 12 KOhm synchronization pulse: ≥ 100 µs, synchronization interpulse period: ≥ 2 ms |
| Transducer | epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT |
| UL approval | cULus Listed, Class 2 Power Source |
| Width | 80 mm |
器件图片
技术资料
该型号暂未收录资料。