全部替代型号
查看完整报告技术参数
| 电源 | |
|---|---|
| Inductive overvoltage protection | yes |
| No-load supply current | I 0 | ≤ 2 mA |
| Operating current | I L | 5 ... 300 mA |
| Operating voltage | U B | 20 ... 265 V AC/DC |
| Voltage drop | U d | ≤ 8 V |
| 交流 / 直流特性 | |
| Repeat accuracy | R | 0.75 mm |
| Switching frequency | f | 0 ... 25 Hz |
| Time delay before availability | t v | ≤ 100 ms |
| 环境与封装 | |
| Ambient temperature | -25 ... 85 °C (-13 ... 185 °F) |
| Height | 41 mm |
| Height 41 mm Width 60 mm Length 77 mm | Height | 41 mm | Width | 60 mm | Length | 77 mm |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| 其他 | |
| Actuating element | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 90 mm x 90 mm x 1 mm |
| Assured operating distance | s a | 0 ... 24.3 mm |
| Connection type | screw terminals |
| Core cross section | up to 2.5 mm 2 |
| Degree of protection | IP65 |
| Diagnostic Coverage (DC) | 0 % |
| Housing base | PBT |
| Housing material | PBT |
| Hysteresis | H | 0.05 ... 7.26 mm |
| Installation | non-flush |
| Length | 77 mm |
| Mass | 270 g |
| Mission Time (T M ) | 20 a |
| MTTF d | 1730 a |
| Output polarity | AC/DC |
| Output type | Two-wire |
| Overload resistance | no |
| Rated operating distance | s n | 30 mm |
| Reduction factor r 304 | 0.5 |
| Reduction factor r Al | 0.2 |
| Reduction factor r Brass | 0.2 |
| Reduction factor r Cu | 0.1 |
| Reverse polarity protection | yes |
| Sensing face | PBT |
| Short-circuit protection | no |
| Standards | EN IEC 60947-5-2 |
| Standards EN IEC 60947-5-2 | Standards | EN IEC 60947-5-2 |
| Supplementary information | The default setting of switching function is NO |
| Surge suppression | yes |
| Switching function | Normally open/closed (NO/NC) |
| Switching state indicator | LED, yellow |
| Width | 60 mm |
| Wire breakage protection | yes |
器件图片
技术资料
该型号暂未收录资料。