全部替代型号
查看完整报告技术参数
| 电源 | |
|---|---|
| Operating voltage | U B | 10 ... 30 V DC |
| Power consumption | P 0 | max. 3 W |
| Switching current | max. 40 mA |
| Switching voltage | max. 40 V DC |
| Voltage drop | U d | 1 V at load current ≤ 10 mA |
| 交流 / 直流特性 | |
| Noise immunity | EN 61000-6-2:2005 |
| Resolution | 0.2 mm ( 8 mils ) |
| 环境与封装 | |
| Ambient temperature | 0 ... 45 °C (32 ... 113 °F) |
| Height | 34 mm |
| Height 34 mm Width 68 mm Depth 84 mm | Height | 34 mm | Width | 68 mm | Depth | 84 mm |
| Storage temperature | -20 ... 70 °C (-4 ... 158 °F) |
| 其他 | |
| Beam divergence | < 1.5 mrad |
| Connection | 2 m cable with 25-pin Sub-D connector |
| Degree of protection | EN 60529 |
| Depth | 84 mm |
| Directive conformity | EMC Directive 2004/108/EC |
| Emitted interference | EN 55022 |
| Housing | Aluminum |
| Housing Aluminum | Housing | Aluminum |
| Input type | External triggering |
| Interface type | serial , RS-232 and RS-485 up to 115.2 kBit/s ID-NET™ up to 1 Mbit/s |
| Laser class | 2 |
| Light source | laser diode |
| Light type | modulated visible red light |
| Mass | 330 g |
| max. pulse energy | 1.19 µJ |
| Note | LASER LIGHT , DO NOT STARE INTO BEAM |
| Opening angle | 50 ° |
| Operation indicator | LED blue: Power on, LED green: Ready to read (READY), LED green: Read successfully (GOOD), LED yellow: External trigger signal pending (TRIGGER), LED yellow: Communication active (COM), LED red: "no read" (STATUS) |
| Optical face | lateral (angle 102°) |
| Pulse length | 1.3 ms |
| Read distance | 40 ... 300 mm |
| Relative humidity | 90 % , non-condensing |
| Repetition rate | 200 Hz |
| Scan rate | 500 ... 800 s -1 |
| Shock resistance | IEC 68-2-27 Test EA 30G; 11 ms; 3 impacts on each axis |
| Signal output | 2, programmable, optocoupled |
| Vibration resistance | IEC 68-2-6 Test FC 1.5 mm ; 10 ... 55 Hz ; 2 hours on each axis |
| Wave length | 650 nm |
| Width | 68 mm |
器件图片
技术资料
该型号暂未收录资料。