93654
在产Cable pull rotary encoder with analog interface and push buttons
全部替代型号
查看完整报告技术参数
| 电源 | |
|---|---|
| No-load supply current | I 0 | typ. 20 mA |
| Operating voltage | U B | 8 ... 32 V DC |
| 交流 / 直流特性 | |
| Noise immunity | EN 61000-6-2:2005 |
| Resolution | Cable pull: Design 130 mm: 0.04 mm Encoder: 17 bit (13 bit/revolution) |
| 环境与封装 | |
| Ambient temperature | -30 ... 70 °C (-22 ... 158 °F) |
| Storage temperature | -30 ... 70 °C (-22 ... 158 °F) |
| 其他 | |
| Cable pull | anodized aluminum |
| Climatic testing | DIN EN 60068-2-3, no moisture condensation |
| Connection side | Encoder: IP65 Cable pull: IP64 |
| Connection side Encoder: IP65 Cable pull: IP64 | Connection side | Encoder: IP65 Cable pull: IP64 |
| Connector | M12 connector, 5 pin |
| Construction type | 130 mm |
| Default setting | rising ramp at ccw rotation |
| Degree of protection | according DIN EN 60529 |
| Detection type | magnetic sampling |
| Device type | Performance Line |
| Drum perimeter | 334.1 mm |
| Emitted interference | EN 61000-6-4:2007 |
| Flange | anodized aluminum |
| High | 8 ... 32 V DC |
| High 8 ... 32 V DC | High | 8 ... 32 V DC |
| Housing | aluminum, coated |
| Housing aluminum, coated Cable pull anodized aluminum Flange anodized aluminum Rope Stainless steel 1.4401/316 | Housing | aluminum, coated | Cable pull | anodized aluminum | Flange | anodized aluminum | Rope | Stainless steel 1.4401/316 |
| Input type | lower limit of measuring range |
| Life span | up to 10 6 Cycles |
| Linearity error | ≤ 0.15 % |
| Load resistor | min. 500 Ω Max. value for supply voltage 8 V. For higher supply voltage lower load resistance can be used. |
| Mass | 2888 g |
| Measuring length | 2000 mm |
| Output type | analog current output 4 ... 20 mA |
| Relative humidity | 98 % , no moisture condensation |
| Retraction speed | 4 m/s |
| Rope | Stainless steel 1.4401/316 |
| Rope diameter | 1.35 mm |
| Signal duration | min. 1 s |
| Spring retraction force | 15 ... 21 N |
器件图片
技术资料
该型号暂未收录资料。