全部替代型号
查看完整报告技术参数
| 电源 | |
|---|---|
| No-load supply current | I 0 | ≤ 10 mA |
| Off-state current | I r | ≤ 0.1 mA |
| Operating current | I L | 0 ... 200 mA |
| Operating voltage | U B | 10 ... 30 V |
| Voltage drop | U d | ≤ 2 V |
| 交流 / 直流特性 | |
| Switching frequency | f | 0 ... 600 Hz |
| Time delay before availability | t v | ≤ 40 ms |
| 环境与封装 | |
| Ambient temperature | -25 ... 85 °C (-13 ... 185 °F) |
| 其他 | |
| A | 0 mm |
| A 0 mm B 6 mm C 18 mm F 50 mm | A | 0 mm | B | 6 mm | C | 18 mm | F | 50 mm |
| Assured operating distance | s a | 0 ... 4.86 mm |
| B | 6 mm |
| C | 18 mm |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Connection type | cable TPE-S , 5 m |
| Degree of protection | IP68 / IP69K |
| Diagnostic Coverage (DC) | 0 % |
| Diameter | 12 mm |
| F | 50 mm |
| Housing material | Stainless steel 1.4435 / AISI 316L |
| Hysteresis | H | 3 ... 15 typ. 5 % |
| Installation | flush in mild steel |
| Length | 69 mm |
| Length 69 mm Diameter 12 mm | Length | 69 mm | Diameter | 12 mm |
| Mass | 112 g |
| Mission Time (T M ) | 20 a |
| MTTF d | 652 a |
| Operating pressure statically | 80 bar (1160.3 psi) max. |
| Output polarity | DC |
| Output type | PNP |
| Rated operating distance | s n | 6 mm |
| Reduction factor r 304 | 0.5 (0.9 of material thickness 2 mm) |
| Reduction factor r Al | 1 |
| Reduction factor r Cu | 0.85 |
| Reduction factor r St37 | 1 |
| Reverse polarity protection | yes |
| Sensing face | Stainless steel 1.4435 / AISI 316L |
| Short-circuit protection | yes |
| Standards | EN IEC 60947-5-2 |
| Standards EN IEC 60947-5-2 | Standards | EN IEC 60947-5-2 |
| Switching function | Normally open (NO) |
| Switching state indicator | LED, yellow |
| UL approval | cULus Listed |
器件图片
技术资料
该型号暂未收录资料。