RKJXY Series RKJXY1000006 Directional resolution : Continuous ･ Center-push : Without ･ Dimensions (W×D×H) : 19.6×18.1×4.9mm ･ Rated power : 0.025W
全部替代型号
查看完整报告技术参数
| 电源 | |
|---|---|
| Maximum operating voltage | 5V DC |
| Rated power | 0.025W |
| 交流 / 直流特性 | |
| Directional resolution | Continuous |
| Slider noise | 300mV p-p max. by JIS method |
| 环境与封装 | |
| 1 case / export packing | 2,000 |
| 1 case / Japan | 2,000 |
| Dimensions (W×D×H) | 19.6×18.1×4.9mm |
| Export package measurements (mm) | 540×360×230 |
| Number of packages (pcs.) | 1 case / Japan 2,000 1 case / export packing 2,000 |
| Operating temperature range | -10℃ to +70℃ |
| 其他 | |
| Actuator strength | Push/pull directions 50N |
| Center push | Without |
| Center push part | Center push Without |
| Cold | -30℃ 96h |
| Damp heat | 60℃, 90 to 95%RH 96h |
| Directional operating force | 0.43±0.25N |
| Directions | 1,000,000 cycles |
| Discontinued | The product is no longer produced or sold. |
| Dry heat | 80℃ 96h |
| Durability | Operating life Directions 1,000,000 cycles |
| Electrical performance | Directional resolution Continuous Rated power 0.025W Slider noise 300mV p-p max. by JIS method |
| Environmental performance | Cold -30℃ 96h Dry heat 80℃ 96h Damp heat 60℃, 90 to 95%RH 96h |
| Export | 2,000 |
| Japan | 2,000 |
| Lever return mechanism | With |
| Lever return precision | ±5° |
| Mechanical performance | Directional operating force 0.43±0.25N Lever return precision ±5° Actuator strength Push/pull directions 50N |
| Minimum order unit(pcs.) | Japan 2,000 Export 2,000 |
| Not Recommended for New Designs | It is currently produced to support customers using it for already existing designs. Please do not use the product for new designs. |
| Number of operating shafts | Single-shaft |
| Operating angle | Each direction 15.5°±3.4° |
| Operating life | Directions 1,000,000 cycles |
| Potentiometer part | Maximum operating voltage 5V DC Operating angle Each direction 15.5°±3.4° Resistance taper B Total resistance 2kΩ |
| Push/pull directions | 50N |
| Resistance taper | B |
| Semi-Standard | The product is a semi-custom or optional product. It is mass-produced and may be used for new designs. |
| Shaft material | Resin |
| Standard | The product is mass-produced and recommended for new designs. |
| Total resistance | 2kΩ |
| Under Development | The product is in the development stage and not yet mass-produced. |
器件图片
技术资料
该型号暂未收录资料。