| 其他 |
|---|
| 01115.0-00 | 0 °C - 60 °C |
| 01115.9-00 | 32 °F - 140 °F |
| AC/DC | AC;DC |
| Casing | Plastic to UL94 V-0, light grey |
| Connection | 2-pole clamp: Rigid wire cable 2.5 mm² (AWG 14) Stranded wire 1.5 mm² (AWG 16) |
| Contact type | Snap-action contact |
| Depth | 42 mm |
| Design | Normally closed (NC) |
| Device type | Thermostats |
| Minimal switching capacity | 0,48 W |
| Note | The controller's contact system is exposed to the effects of the environment, which can change the contact resistance. This can lead to a voltage drop and/or self-heating of the contacts. Switching resistive loads (switching inductive loads). Wire end ferrules must be used for connections with stranded wires. |
| Operating humidity | ≤90 % RH |
| Protection type | IP20 |
| Sensor | Thermostatic bimetal |
| Service life | >100000 cycles |
| Storage humidity | ≤90 % RH |
| Switching capacity | AC 250 V: 10 (2) A; AC 120 V: 15 (2) A; DC 24-72 V: 30 W |
| Switching differential | 4 K |
| Switching differential tolerance | ± 3 K |
| Torque | 0,5 Nm max. |
| Weight | 50 g |
| Width | 33 mm |
