搜索结果：35610

CONN KNIFE TERM 16-22 AWG

DISPENS BOTTL 2OZ 18/20/26GA 3PC

CONN KNIFE TERM 16-22 AWG

Die BERNSTEIN Gehäuse der Typenreihe CT bestehen aus ABS, gehören zu den thermoplastischen Kunststoffen und werden mittels des Spritzgussverfahrens hergestellt. Der Kunststoff ABS zeichnet sich durch geringes Gewicht, hohe Schlagfestigkeit, Kratzfestigkeit, chemische Resistenz und gute Isolationseigenschaften aus. Die ABS-Gehäuse werden standardmäßig mit dem durch BERNSTEIN entwickelten und patentierten Schnellverschluss ausgeliefert. Der beiliegende Schnellverschluss kann einfach in den Deckel gedrückt werden und hält sich dann selbst.

Part Number: 3561000501 61 PLATE – Digits 1 & 2 = Product Class – Digits 3 & 4 = Material Grade The Plate Design offers a much needed geometry to be used with the EM Field Applications, i.e. Wireless Power Transfer (WPT), Field focusing, and circuit protection from nearby fields. Plates can be supplied in 31, 43, 61, 75, and 95 material. The A + B dimension can be modified to suit specific applications. (g) + Test frequency Ferrite plates are controlled for Inductance up to 20 Amps. Inductance values are specified at 85 kHz. Saturation Bias is measured up to 20 amps at 85 kHz with 105 turns. CSV Download A high frequency NiZn ferrite developed for a range of inductive applications up to 25 MHz. This material is also used in EMI applications for suppression of noise frequencies above 200 MHz. Excellent stability characteristics. EMI Suppression Beads Beads On Leads SM beads Wound Beads Multi-Aperture Cores Round Cable Snap-Its Toroids Rods Antenna/RFID Rods Round EMI Suppression Cores **** Characteristic curves are measured on standard Toroids (18/10/6 mm) at 25°C and 10 kHz unless otherwise indicated. Impedance characteristics are measured on standard shield beads (3.5/1.3/6.0 mm) unless otherwise indicated.

Part Number: 3561000511 61 PLATE – Digits 1 & 2 = Product Class – Digits 3 & 4 = Material Grade The Plate Design offers a much needed geometry to be used with the EM Field Applications, i.e. Wireless Power Transfer (WPT), Field focusing, and circuit protection from nearby fields. Plates can be supplied in 31, 43, 61, 75, and 95 material. The A + B dimension can be modified to suit specific applications. (g) + Test frequency Ferrite plates are controlled for Inductance up to 20 Amps. Inductance values are specified at 85 kHz. Saturation Bias is measured up to 20 amps at 85 kHz with 105 turns. CSV Download A high frequency NiZn ferrite developed for a range of inductive applications up to 25 MHz. This material is also used in EMI applications for suppression of noise frequencies above 200 MHz. Excellent stability characteristics. EMI Suppression Beads Beads On Leads SM beads Wound Beads Multi-Aperture Cores Round Cable Snap-Its Toroids Rods Antenna/RFID Rods Round EMI Suppression Cores **** Characteristic curves are measured on standard Toroids (18/10/6 mm) at 25°C and 10 kHz unless otherwise indicated. Impedance characteristics are measured on standard shield beads (3.5/1.3/6.0 mm) unless otherwise indicated.

Part Number: 3561000521 61 PLATE – Digits 1 & 2 = Product Class – Digits 3 & 4 = Material Grade The Plate Design offers a much needed geometry to be used with the EM Field Applications, i.e. Wireless Power Transfer (WPT), Field focusing, and circuit protection from nearby fields. Plates can be supplied in 31, 43, 61, 75, and 95 material. The A + B dimension can be modified to suit specific applications. (g) + Test frequency Ferrite plates are controlled for Inductance up to 20 Amps. Inductance values are specified at 85 kHz. Saturation Bias is measured up to 20 amps at 85 kHz with 105 turns. CSV Download A high frequency NiZn ferrite developed for a range of inductive applications up to 25 MHz. This material is also used in EMI applications for suppression of noise frequencies above 200 MHz. Excellent stability characteristics. EMI Suppression Beads Beads On Leads SM beads Wound Beads Multi-Aperture Cores Round Cable Snap-Its Toroids Rods Antenna/RFID Rods Round EMI Suppression Cores **** Characteristic curves are measured on standard Toroids (18/10/6 mm) at 25°C and 10 kHz unless otherwise indicated. Impedance characteristics are measured on standard shield beads (3.5/1.3/6.0 mm) unless otherwise indicated.

Part Number: 3561000531 61 PLATE – Digits 1 & 2 = Product Class – Digits 3 & 4 = Material Grade The Plate Design offers a much needed geometry to be used with the EM Field Applications, i.e. Wireless Power Transfer (WPT), Field focusing, and circuit protection from nearby fields. Plates can be supplied in 31, 43, 61, 75, and 95 material. The A + B dimension can be modified to suit specific applications. (g) + Test frequency Ferrite plates are controlled for Inductance up to 20 Amps. Inductance values are specified at 85 kHz. Saturation Bias is measured up to 20 amps at 85 kHz with 105 turns. CSV Download A high frequency NiZn ferrite developed for a range of inductive applications up to 25 MHz. This material is also used in EMI applications for suppression of noise frequencies above 200 MHz. Excellent stability characteristics. EMI Suppression Beads Beads On Leads SM beads Wound Beads Multi-Aperture Cores Round Cable Snap-Its Toroids Rods Antenna/RFID Rods Round EMI Suppression Cores **** Characteristic curves are measured on standard Toroids (18/10/6 mm) at 25°C and 10 kHz unless otherwise indicated. Impedance characteristics are measured on standard shield beads (3.5/1.3/6.0 mm) unless otherwise indicated.

Part Number: 3561000541 61 PLATE – Digits 1 & 2 = Product Class – Digits 3 & 4 = Material Grade The Plate Design offers a much needed geometry to be used with the EM Field Applications, i.e. Wireless Power Transfer (WPT), Field focusing, and circuit protection from nearby fields. Plates can be supplied in 31, 43, 61, 75, and 95 material. The A + B dimension can be modified to suit specific applications. (g) + Test frequency Ferrite plates are controlled for Inductance up to 20 Amps. Inductance values are specified at 85 kHz. Saturation Bias is measured up to 20 amps at 85 kHz with 105 turns. CSV Download A high frequency NiZn ferrite developed for a range of inductive applications up to 25 MHz. This material is also used in EMI applications for suppression of noise frequencies above 200 MHz. Excellent stability characteristics. EMI Suppression Beads Beads On Leads SM beads Wound Beads Multi-Aperture Cores Round Cable Snap-Its Toroids Rods Antenna/RFID Rods Round EMI Suppression Cores **** Characteristic curves are measured on standard Toroids (18/10/6 mm) at 25°C and 10 kHz unless otherwise indicated. Impedance characteristics are measured on standard shield beads (3.5/1.3/6.0 mm) unless otherwise indicated.

Part Number: 3561000551 61 PLATE – Digits 1 & 2 = Product Class – Digits 3 & 4 = Material Grade The Plate Design offers a much needed geometry to be used with the EM Field Applications, i.e. Wireless Power Transfer (WPT), Field focusing, and circuit protection from nearby fields. Plates can be supplied in 31, 43, 61, 75, and 95 material. The A + B dimension can be modified to suit specific applications. (g) + Test frequency Ferrite plates are controlled for Inductance up to 20 Amps. Inductance values are specified at 85 kHz. Saturation Bias is measured up to 20 amps at 85 kHz with 105 turns. CSV Download A high frequency NiZn ferrite developed for a range of inductive applications up to 25 MHz. This material is also used in EMI applications for suppression of noise frequencies above 200 MHz. Excellent stability characteristics. EMI Suppression Beads Beads On Leads SM beads Wound Beads Multi-Aperture Cores Round Cable Snap-Its Toroids Rods Antenna/RFID Rods Round EMI Suppression Cores **** Characteristic curves are measured on standard Toroids (18/10/6 mm) at 25°C and 10 kHz unless otherwise indicated. Impedance characteristics are measured on standard shield beads (3.5/1.3/6.0 mm) unless otherwise indicated.

Part Number: 3861004801 61 PLATE – Digits 1 & 2 = Product Class – Digits 3 & 4 = Material Grade The Plate Design offers a much needed geometry to be used with the EM Field Applications, i.e. Wireless Power Transfer (WPT), Field focusing, and circuit protection from nearby fields. Plates can be supplied in 31, 43, 61, 75, and 95 material. The A + B dimension can be modified to suit specific applications. (g) + Test frequency Ferrite plates are controlled for Inductance up to 20 Amps. Inductance values are specified at 85 kHz. Saturation Bias is measured up to 20 amps at 85 kHz with 105 turns. CSV Download A high frequency NiZn ferrite developed for a range of inductive applications up to 25 MHz. This material is also used in EMI applications for suppression of noise frequencies above 200 MHz. Excellent stability characteristics. EMI Suppression Beads Beads On Leads SM beads Wound Beads Multi-Aperture Cores Round Cable Snap-Its Toroids Rods Antenna/RFID Rods Round EMI Suppression Cores **** Characteristic curves are measured on standard Toroids (18/10/6 mm) at 25°C and 10 kHz unless otherwise indicated. Impedance characteristics are measured on standard shield beads (3.5/1.3/6.0 mm) unless otherwise indicated.

Part Number: 3861004901 61 PLATE – Digits 1 & 2 = Product Class – Digits 3 & 4 = Material Grade The Plate Design offers a much needed geometry to be used with the EM Field Applications, i.e. Wireless Power Transfer (WPT), Field focusing, and circuit protection from nearby fields. Plates can be supplied in 31, 43, 61, 75, and 95 material. The A + B dimension can be modified to suit specific applications. (g) + Test frequency Ferrite plates are controlled for Inductance up to 20 Amps. Inductance values are specified at 85 kHz. Saturation Bias is measured up to 20 amps at 85 kHz with 105 turns. CSV Download A high frequency NiZn ferrite developed for a range of inductive applications up to 25 MHz. This material is also used in EMI applications for suppression of noise frequencies above 200 MHz. Excellent stability characteristics. EMI Suppression Beads Beads On Leads SM beads Wound Beads Multi-Aperture Cores Round Cable Snap-Its Toroids Rods Antenna/RFID Rods Round EMI Suppression Cores **** Characteristic curves are measured on standard Toroids (18/10/6 mm) at 25°C and 10 kHz unless otherwise indicated. Impedance characteristics are measured on standard shield beads (3.5/1.3/6.0 mm) unless otherwise indicated.

HOOK-UP STRND 10AWG WHITE 2000'

HOOK-UP STRND 10AWG BLACK

CONN HEADER R/A 10POS 3MM

CONN HEADER R/A 10POS 3MM

CONN HEADER VERT 10POS 3MM

CONN HEADER VERT 10POS 3MM