103109

Active

Diffuse mode sensor

All alternatives

Technical parameters

Power
No-load supply current	I 0 \| < 25 mA
Operating voltage	U B \| 10 ... 30 V DC
Switching current	max. 100 mA , resistive load
Switching voltage	max. 30 V DC
Voltage drop	U d \| ≤ 2 V DC
AC and DC characteristics
Ripple	max. 10 %
Switching frequency	f \| 500 Hz
Environment and package
Ambient temperature	-40 ... 60 °C (-40 ... 140 °F)
Length 60 mm Diameter 18 mm Thread size M18	Length \| 60 mm \| Diameter \| 18 mm \| Thread size \| M18
Storage temperature	-40 ... 70 °C (-40 ... 158 °F)
Thread size	M18
Other
Adjustment range	30 ... 600 mm
Ambient light limit	EN 60947-5-2 20000 Lux
Cable	PVC
Connection	2 m fixed cable
Control elements	sensitivity adjustment
Degree of protection	IP67
Detection range	0 ... 600 mm
Detection range max.	0 ... 600 mm
Detection range min.	0 ... 30 mm
Diagnostic Coverage (DC)	0 %
Diameter	18 mm
Diameter of the light spot	approx. 40 mm at 600 mm
Function indicator	LED yellow: constantly on - object detected constantly off - object not detected
Housing	brass, nickel-plated
Housing brass, nickel-plated Optical face PMMA Cable PVC	Housing \| brass, nickel-plated \| Optical face \| PMMA \| Cable \| PVC
Hysteresis	H \| < 15 %
Length	60 mm
Light source	LED
Light type	modulated visible red light
Mass	approx. 70 g
Mission Time (T M )	20 a
MTTF d	854 a
Opening angle	approx. 2.6 °
Operation indicator	LED green: on - power on flashing (4 Hz) - short circuit
Optical face	frontal
Product standard	EN 60947-5-2
Protection class	III
Reference target	standard white 200 mm X 200 mm
Response time	≤ 1 ms
Signal output	1 NPN output, short-circuit protected, reverse polarity protected, open collector
Switching type	The switching type of the sensor is adjustable. The default setting is: Q - Pin4: NPN output / light-on L/D-On - WH: Low-active input
UL approval	E87056 , cULus Listed , class 2 power supply , type rating 1

Documents

No documents are linked to this part yet.