Pepperl+Fuchs, Inc.Germany
103223
ActiveThru-beam sensor, 20 m detection range, red light, light/dark on, DC version, NPN output, sensitivity adjuster, emitter switch-off, fixed cable
All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| No-load supply current | I 0 | Emitter: ≤ 15 mA Receiver: ≤ 8 mA |
| Operating voltage | U B | 10 ... 30 V DC |
| Switching current | max. 100 mA , resistive load |
| Switching voltage | max. 30 V DC |
| Voltage drop | U d | ≤ 1.5 V DC |
| AC and DC characteristics | |
| Ripple | max. 10 % |
| Switching frequency | f | 250 Hz |
| Environment and package | |
| Ambient temperature | -30 ... 60 °C (-22 ... 140 °F) |
| Height | 31 mm |
| Height 31 mm Width 11 mm Depth 20 mm | Height | 31 mm | Width | 11 mm | Depth | 20 mm |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
| Other | |
| Ambient light limit | EN 60947-5-2 |
| Cable length | 5 m |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Connection | 5 m fixed cable |
| Control elements | sensitivity adjustment |
| Degree of protection | IP67 |
| Depth | 20 mm |
| Diagnostic Coverage (DC) | 0 % |
| Diameter of the light spot | approx. 2 m at a distance of 30 m |
| Effective detection range | 0 ... 20 m |
| Emitter | M100-RT/35/76b/115-5M |
| Function indicator | Receiver: LED yellow, lights up when light beam is free, flashes when falling short of the operating reserve ; OFF when light beam is interrupted |
| Housing | PC (Polycarbonate) |
| Housing PC (Polycarbonate) Optical face PMMA | Housing | PC (Polycarbonate) | Optical face | PMMA |
| Light source | LED |
| Light type | modulated visible red light |
| Mass | approx. 110 g (emitter and receiver) |
| Mission Time (T M ) | 20 a |
| MTTF d | 860 a |
| Opening angle | approx. 2 ° |
| Operation indicator | LED green: power on |
| Optical face | frontal |
| Product standard | EN 60947-5-2 |
| Receiver | MV100-RT/35/102/115-5M |
| Response time | 2 ms |
| Signal output | 1 NPN output, short-circuit protected, reverse polarity protected, open collector |
| Switching type | The switching type of the sensor is adjustable. The default setting is: light-on |
| Test input | emitter deactivation at 0 V |
| Threshold detection range | 30 m |
| Tightening torque, fastening screws | 0.6 Nm |
| UL approval | cULus Listed, Class 2 Power Source or listed Power Supply with a limited voltage output with (maybe integrated) fuse (max. 3.3 A according UL248), Type 1 enclosure |
| Width | 11 mm |
Documents
No documents are linked to this part yet.