103819

Active

Inductive sensor

All alternatives

Technical parameters

Power
Measuring plate not detected ≥ 3 mA at nominal voltage Measuring plate detected ≤ 1 mA at nominal voltage	Measuring plate not detected \| ≥ 3 mA at nominal voltage \| Measuring plate detected \| ≤ 1 mA at nominal voltage
Nominal voltage	U o \| 8.2 V (R i approx. 1 kΩ)
Operating voltage	U B \| 5 ... 25 V
AC and DC characteristics
Switching frequency	f \| 0 ... 3000 Hz
Environment and package
Ambient temperature	-40 ... 100 °C (-40 ... 212 °F)
Other
Assured operating distance	s a \| 0 ... 1.62 mm
Bending radius	> 10 x cable diameter
Cable diameter	4.8 mm ± 0.2 mm
Cable diameter 4.8 mm ± 0.2 mm Bending radius > 10 x cable diameter Material silicone Core cross section 0.34 mm 2 Length L 2 m	Cable diameter \| 4.8 mm ± 0.2 mm \| Bending radius \| > 10 x cable diameter \| Material \| silicone \| Core cross section \| 0.34 mm 2 \| Length \| L \| 2 m
Connection type	cable
Core cross section	0.34 mm 2
Degree of protection	IP68
Diagnostic Coverage (DC)	0 %
Diameter	14 mm
Equipment protection level Da	IECEx PTB 11.0092X
Equipment protection level Gb	IECEx PTB 11.0092X
Equipment protection level Gb IECEx PTB 11.0092X Equipment protection level Da IECEx PTB 11.0092X Equipment protection level Mb IECEx PTB 11.0092X	Equipment protection level Gb \| IECEx PTB 11.0092X \| Equipment protection level Da \| IECEx PTB 11.0092X \| Equipment protection level Mb \| IECEx PTB 11.0092X
Equipment protection level Gb PTB 00 ATEX 2049 X Equipment protection level Da PTB 00 ATEX 2049 X	Equipment protection level Gb \| PTB 00 ATEX 2049 X \| Equipment protection level Da \| PTB 00 ATEX 2049 X
Equipment protection level Mb	IECEx PTB 11.0092X
Housing material	Stainless steel 1.4305 / AISI 303
Installation	flush
Length	L \| 2 m
Length 30 mm Diameter 14 mm	Length \| 30 mm \| Diameter \| 14 mm
Material	silicone
Measuring plate detected	≤ 1 mA at nominal voltage
Measuring plate not detected	≥ 3 mA at nominal voltage
Mission Time (T M )	20 a
MTTF d	7660 a
NAMUR	EN 60947-5-6:2000 IEC 60947-5-6:1999
NAMUR EN 60947-5-6:2000 IEC 60947-5-6:1999 Standards EN IEC 60947-5-2	NAMUR \| EN 60947-5-6:2000 IEC 60947-5-6:1999 \| Standards \| EN IEC 60947-5-2
Output type	NAMUR with safety function
Rated operating distance	s n \| 2 mm
Reduction factor r 304	0.85
Reduction factor r Al	0.4
Reduction factor r Cu	0.3
Scope of delivery	Supplied with 2 nuts
Sensing face	PBT
Standards	EN IEC 60947-5-2
Switching function	Normally closed (NC)
UL approval	cULus Listed Load Type: Resistive Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 8.2 V DC
Use in the hazardous area	see instruction manuals

Documents

No documents are linked to this part yet.