All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| Nominal voltage | U o | 8.2 V (R i approx. 1 kΩ) |
| AC and DC characteristics | |
| Switching frequency | f | 0 ... 100 Hz |
| Environment and package | |
| Ambient temperature | -40 ... 100 °C (-40 ... 212 °F) |
| Height | 40 mm |
| Height 40 mm Width 84 mm Length 84 mm | Height | 40 mm | Width | 84 mm | Length | 84 mm |
| Other | |
| Assured operating distance | s a | 0 ... 32.4 mm |
| Connection (system side) | screw terminals , M20 x 1.5 cable gland , usable thread length 10 mm , screw-in depth max. 10 mm |
| Connection type | screw terminals |
| Core cross section | up to 2.5 mm 2 , stripped insulation length: 7 mm |
| Degree of protection | IP68 |
| Equipment protection level Da | IECEx PTB 11.0092X |
| Equipment protection level Gb | IECEx PTB 11.0092X |
| Equipment protection level Gb IECEx PTB 11.0092X Equipment protection level Da IECEx PTB 11.0092X Equipment protection level Mb IECEx PTB 11.0092X | Equipment protection level Gb | IECEx PTB 11.0092X | Equipment protection level Da | IECEx PTB 11.0092X | Equipment protection level Mb | IECEx PTB 11.0092X |
| Equipment protection level Gb PTB 00 ATEX 2049 X Equipment protection level Da PTB 00 ATEX 2049 X | Equipment protection level Gb | PTB 00 ATEX 2049 X | Equipment protection level Da | PTB 00 ATEX 2049 X |
| Equipment protection level Mb | IECEx PTB 11.0092X |
| Housing material | PBT |
| Installation | flush |
| Length | 84 mm |
| Measuring plate detected | ≤ 1 mA |
| Measuring plate not detected | min. 3 mA |
| Measuring plate not detected min. 3 mA Measuring plate detected ≤ 1 mA | Measuring plate not detected | min. 3 mA | Measuring plate detected | ≤ 1 mA |
| NAMUR | EN 60947-5-6:2000 IEC 60947-5-6:1999 |
| NAMUR EN 60947-5-6:2000 IEC 60947-5-6:1999 Standards EN IEC 60947-5-2 | NAMUR | EN 60947-5-6:2000 IEC 60947-5-6:1999 | Standards | EN IEC 60947-5-2 |
| Output type | NAMUR with safety function |
| Rated operating distance | s n | 40 mm |
| Reduction factor r 304 | 0.85 |
| Reduction factor r Al | 0.4 |
| Reduction factor r Cu | 0.3 |
| Sensing face | PBT |
| Standards | EN IEC 60947-5-2 |
| Switching function | Normally closed (NC) |
| UL approval | cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 8.2 V DC |
| Use in the hazardous area | see instruction manuals |
| Width | 84 mm |
Documents
No documents are linked to this part yet.