All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| Nominal voltage | U o | 8 V |
| AC and DC characteristics | |
| Switching frequency | f | 0 ... 5000 Hz |
| Environment and package | |
| Ambient temperature | -25 ... 100 °C (-13 ... 212 °F) |
| Other | |
| ANZEx | 18.3018X |
| Assured operating distance | s a | 0 ... 1.215 mm |
| Bending radius | > 10 x cable diameter |
| Cable diameter | 3.5 mm ± 0.2 mm |
| Cable diameter 3.5 mm ± 0.2 mm Bending radius > 10 x cable diameter Material PUR Core cross section 0.14 mm 2 Length L 2 m | Cable diameter | 3.5 mm ± 0.2 mm | Bending radius | > 10 x cable diameter | Material | PUR | Core cross section | 0.14 mm 2 | Length | L | 2 m |
| CML approval | on request |
| Connection type | cable |
| Core cross section | 0.14 mm 2 |
| Degree of protection | IP67 |
| Diameter | 6.5 mm |
| Equipment protection level Da | IECEx PTB 11.0037X |
| Equipment protection level Gb | IECEx PTB 11.0037X |
| Equipment protection level Gb IECEx PTB 11.0037X Equipment protection level Da IECEx PTB 11.0037X Equipment protection level Mb IECEx PTB 11.0037X | Equipment protection level Gb | IECEx PTB 11.0037X | Equipment protection level Da | IECEx PTB 11.0037X | Equipment protection level Mb | IECEx PTB 11.0037X |
| Equipment protection level Gb PTB 00 ATEX 2048 X Equipment protection level Da PTB 00 ATEX 2048 X | Equipment protection level Gb | PTB 00 ATEX 2048 X | Equipment protection level Da | PTB 00 ATEX 2048 X |
| Equipment protection level Mb | IECEx PTB 11.0037X |
| Housing material | Stainless steel 1.4305 / AISI 303 |
| Hysteresis | H | typ. % |
| Installation | flush |
| Length | L | 2 m |
| Length 22 mm Diameter 6.5 mm | Length | 22 mm | Diameter | 6.5 mm |
| Material | PUR |
| Measuring plate detected | ≤ 1 mA |
| Measuring plate not detected | min. 3 mA |
| Measuring plate not detected min. 3 mA Measuring plate detected ≤ 1 mA | Measuring plate not detected | min. 3 mA | Measuring plate detected | ≤ 1 mA |
| NAMUR | EN 60947-5-6:2000 IEC 60947-5-6:1999 |
| NAMUR EN 60947-5-6:2000 IEC 60947-5-6:1999 Standards EN IEC 60947-5-2 | NAMUR | EN 60947-5-6:2000 IEC 60947-5-6:1999 | Standards | EN IEC 60947-5-2 |
| Output type | NAMUR |
| Rated operating distance | s n | 1.5 mm |
| Reduction factor r 304 | 0.65 |
| Reduction factor r Al | 0.22 |
| Reduction factor r Cu | 0.19 |
| Sensing face | PBT |
| Standards | EN IEC 60947-5-2 |
| Suitable for 2:1 technology | yes , Reverse polarity protection diode not required |
| Switching function | Normally closed (NC) |
| UL approval | cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 8.2 V DC |
| Use in the hazardous area | see instruction manuals |
Documents
No documents are linked to this part yet.