All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| Lowest operating current | I m | 2 mA |
| Off-state current | I r | 0 ... 0.5 mA typ. |
| Operating current | I L | 2 ... 100 mA |
| Operating voltage | U B | 5 ... 60 V |
| Voltage drop | U d | ≤ 5 V |
| AC and DC characteristics | |
| Switching frequency | f | 0 ... 1200 Hz |
| Environment and package | |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Other | |
| Actual operating distance | s r | 1.8 ... 2.2 mm typ. |
| Assured operating distance | s a | 0 ... 1.62 mm |
| Bending radius | > 10 x cable diameter |
| Cable diameter | 2.8 mm ± 0.1 mm |
| CCC approval | Certified by China Compulsory Certification (CCC) |
| Color | black |
| Connection type | cable |
| Core cross section | 0.14 mm 2 |
| Degree of protection | IP67 |
| Diagnostic Coverage (DC) | 0 % |
| Diameter | 8 mm |
| Housing material | Stainless steel 1.4305 / AISI 303 |
| Hysteresis | H | 1 ... 10 % typ. 5 % |
| Installation | non-flush |
| Length | L | 2 m |
| Length 40 mm Diameter 8 mm | Length | 40 mm | Diameter | 8 mm |
| Material | PUR |
| MTTF d | 2772 a |
| Number of cores | 2 |
| Output polarity | DC |
| Output type | Two-wire |
| Rated operating distance | s n | 2 mm |
| Reduction factor r 304 | 0.75 |
| Reduction factor r Al | 0.4 |
| Reduction factor r Cu | 0.39 |
| Reverse polarity protection | reverse polarity tolerant |
| Sensing face | PBT |
| Short-circuit protection | pulsing |
| Standards | EN IEC 60947-5-2 |
| Standards EN IEC 60947-5-2 | Standards | EN IEC 60947-5-2 |
| Switching function | Normally closed (NC) |
| Switching state indicator | LED, yellow |
| UL approval | cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 60 V DC Output Switching Current: 100 mA |
| Wire end ferrules | yes |
Documents
No documents are linked to this part yet.