10750

Active

Inductive sensor

All alternatives

Technical parameters

Power
Lowest operating current	I m \| 2 mA
Off-state current	I r \| 0 ... 0.5 mA typ.
Operating current	I L \| 2 ... 100 mA
Operating voltage	U B \| 5 ... 60 V
Voltage drop	U d \| ≤ 5 V
AC and DC characteristics
Switching frequency	f \| 0 ... 100 Hz
Environment and package
Ambient temperature	-25 ... 70 °C (-13 ... 158 °F)
Other
Actual operating distance	s r \| 13.5 ... 16.5 mm typ.
Assured operating distance	s a \| 0 ... 12.2 mm
Bending radius	> 10 x cable diameter
Cable diameter	4.8 mm ± 0.2 mm
CCC approval	Certified by China Compulsory Certification (CCC)
Color	black
Connection type	cable
Core cross section	0.34 mm 2
Degree of protection	IP67
Diagnostic Coverage (DC)	0 %
Diameter	30 mm
Housing material	Stainless steel 1.4305 / AISI 303
Hysteresis	H \| 1 ... 10 % typ. 5 %
Installation	non-flush
Length	L \| 2 m
Length 40 mm Diameter 30 mm	Length \| 40 mm \| Diameter \| 30 mm
Material	PUR
Mission Time (T M )	20 a
MTTF d	1751 a
Number of cores	2
Output polarity	DC
Output type	Two-wire
Rated operating distance	s n \| 15 mm
Reduction factor r 304	0.68
Reduction factor r Al	0.38
Reduction factor r Cu	0.35
Reverse polarity protection	reverse polarity tolerant
Sensing face	PBT
Short-circuit protection	pulsing
Standards	EN IEC 61000-6-2:2019-02 EN IEC 61000-6-3:2021-03
Standards EN IEC 61000-6-2:2019-02 EN IEC 61000-6-3:2021-03	Standards \| EN IEC 61000-6-2:2019-02 EN IEC 61000-6-3:2021-03
Switching function	Normally closed (NC)
Switching state indicator	all direction LED, yellow
UL approval	cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 60 V DC Output Switching Current: 100 mA
Wire end ferrules	yes

Documents

No documents are linked to this part yet.