All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| No-load supply current | I 0 | ≤ 20 mA |
| Off-state current | I r | 0 ... 0.5 mA typ. 0.1 µA at 25 °C |
| Operating current | I L | 0 ... 100 mA |
| Operating voltage | U B | 10 ... 30 V |
| Voltage drop | U d | ≤ 3 V |
| AC and DC characteristics | |
| Switching frequency | f | 0 ... 1500 Hz |
| Environment and package | |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Other | |
| Assured operating distance | s a | 0 ... 1.215 mm |
| Connection type | Connector plug |
| Degree of protection | IP67 |
| Diagnostic Coverage (DC) | 0 % |
| Diameter | 8 mm |
| Housing material | brass, nickel-plated |
| Installation | flush |
| Length | 50 mm |
| Length 50 mm Diameter 8 mm | Length | 50 mm | Diameter | 8 mm |
| Mission Time (T M ) | 20 a |
| MTTF d | 2660 a |
| Number of pins | 4 |
| Output polarity | DC |
| Output type | PNP |
| Rated operating distance | s n | 1.5 mm |
| Reduction factor r 304 | 0.75 |
| Reduction factor r Al | 0.45 |
| Reduction factor r Cu | 0.35 |
| Reverse polarity protection | reverse polarity protected |
| Sensing face | LCP |
| Short-circuit protection | pulsing |
| Standards | EN IEC 60947-5-2 |
| Standards EN IEC 60947-5-2 | Standards | EN IEC 60947-5-2 |
| Switching function | complementary |
| Switching state indicator | LED, yellow |
| Threading | M12 x 1 |
| Threading M12 x 1 Number of pins 4 | Threading | M12 x 1 | Number of pins | 4 |
| UL approval | cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC Output Switching Current: 100 mA |
Documents
No documents are linked to this part yet.