All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| Operating voltage | U B | 10 ... 30 V DC (with galvanic isolation) |
| Power consumption | P 0 | ≤ 3.7 W |
| AC and DC characteristics | |
| Noise immunity | EN 61000-6-2 |
| Overall resolution | up to 30 Bit |
| Single turn up to 16 Bit Multiturn up to 14 Bit Overall resolution up to 30 Bit | Single turn | up to 16 Bit | Multiturn | up to 14 Bit | Overall resolution | up to 30 Bit |
| Time delay before availability | t v | < 250 ms |
| Environment and package | |
| Operating temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Other | |
| Axial | 40 N |
| Axial 40 N Radial 110 N | Axial | 40 N | Radial | 110 N |
| Category | Suitable for cat. 3; both channels of the encoder must be connected to a safety PLC and evaluated there. |
| Climatic testing | DIN EN 60068-2, no moisture condensation |
| Code course (counting direction) | adjustable |
| Connector | 1 plug M12 x 1, 5-pin, A-coded (with connection type BD) 1 plug M12 x 1, 5-pin, A-coded and 1 socket M12 x 1, 5-pin, A-coded (with connection type BN) |
| Cycle time | ≥ 1 ms |
| Degree of protection | DIN EN 60529, IP65 or IP67 |
| Detection type | photoelectric and magnetic sampling |
| Device type | Absolute rotary encoder |
| Diameter | 58 mm |
| Emitted interference | EN 61000-6-4 |
| Flange | Aluminum |
| Housing | Aluminum |
| Housing Aluminum Flange Aluminum Shaft Stainless steel 1.4305 / AISI 303 | Housing | Aluminum | Flange | Aluminum | Shaft | Stainless steel 1.4305 / AISI 303 |
| Interface type | CANopen |
| Length | 55.7 mm |
| Length 55.7 mm Diameter 58 mm | Length | 55.7 mm | Diameter | 58 mm |
| Linearity error | ≤ ± 0.1 ° |
| Mass | approx. 320 g |
| Mission Time (T M ) | 10 a |
| Moment of inertia | 30 gcm 2 |
| MTTF | 100 a at 40 °C (based on EN ISO 13849-1) |
| Multiturn | up to 14 Bit |
| Output code | binary code |
| Performance level (PL) | Suitable for PL d; both channels of the encoder must be connected to a safety PLC and evaluated there. |
| Radial | 110 N |
| Relative humidity | 98 % , no moisture condensation |
| Rotational speed | max. 3000 min -1 |
| Shaft | Stainless steel 1.4305 / AISI 303 |
| Shock resistance | DIN EN 60068-2-27, 100 g , 6 ms |
| Single turn | up to 16 Bit |
| Standard conformity | DSP 406 |
| Starting torque | < 5 Ncm |
| Transfer rate | min. 20 kBit/s , max. 1 MBit/s |
| UL approval | cULus Listed, General Purpose, Class 2 Power Source , if UL marking is marked on the product. |
| UL File Number | E223176 "For use in NFPA 79 Applications only" , if UL marking is marked on the product. |
| Vibration resistance | DIN EN 60068-2-6, 20 g , 10 ... 1000 Hz |
Documents
No documents are linked to this part yet.