13157

Active

Single-beam miniature sensor, ideal for installing in frames or door profiles

All alternatives

Technical parameters

Power
No-load supply current	I 0 \| Emitter: ≤ 25 mA Receiver: ≤ 10 mA
Operating voltage	U B \| 11 ... 30 V DC
Switching current	max. 0.1 A
Switching voltage	max. 30 V DC
AC and DC characteristics
Switching frequency	f \| 100 Hz
Environment and package
Ambient temperature	-20 ... 60 °C (-4 ... 140 °F)
Height	85.2 mm
Height 85.2 mm Width 11.6 mm Depth 9.2 mm	Height \| 85.2 mm \| Width \| 11.6 mm \| Depth \| 9.2 mm
Storage temperature	-20 ... 75 °C (-4 ... 167 °F)
Other
Ambient light limit	40000 Lux
CCC approval	CCC approval / marking not required for products rated ≤36 V
Connection	4-pin plastic connector, 6.5 mm diameter
Degree of protection	IP65
Depth	9.2 mm
Diagnostic Coverage (DC)	0 %
Effective detection range	0 ... 6 m
Emitter	ML29-T/143
Function indicator	LED red in receiver : lights up when receiving the light beam
Housing	PMMA , black
Housing PMMA , black Optical face Plastic pane	Housing \| PMMA , black \| Optical face \| Plastic pane
Light source	IRED
Light type	modulated infrared light
Mass	per device 120 g
Mission Time (T M )	20 a
MTTF d	880 a
Opening angle	+/- 8 °
Optical face	lateral
Product standard	EN 60947-5-2
Receiver	ML29-R/25/102/143
Relative humidity	90 % , non-condensing
Response time	5 ms
Signal output	1 NPN output, short-circuit protected, reverse polarity protected, open collector
Standards	EN 61000-6-2, EN 61000-6-3
Standards EN 61000-6-2, EN 61000-6-3	Standards \| EN 61000-6-2, EN 61000-6-3
Switching type	light-on
Test input	Test: Transmitter switches off at +UB ≤ 5 V DC
Threshold detection range	8.5 m
Width	11.6 mm

Documents

No documents are linked to this part yet.