All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| No-load supply current | I 0 | ≤ 17 mA |
| Off-state current | I r | 0 ... 0.5 mA typ. 0.1 µA at 25 °C |
| Operating current | I L | 0 ... 200 mA |
| Operating voltage | U B | 10 ... 30 V |
| Voltage drop | U d | ≤ 3 V |
| AC and DC characteristics | |
| Switching frequency | f | 0 ... 1500 Hz |
| Environment and package | |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Mounting | with nuts, M12 |
| Storage temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Other | |
| Actuating element | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 12 mm x 12 mm x 1 mm |
| Assured operating distance | s a | 0 ... 1.62 mm |
| Bending radius | > 10 x cable diameter |
| Cable diameter | 3 mm + 0.3 mm |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Color | grey |
| Connection type | cable |
| Core cross section | 0.14 mm 2 |
| Degree of protection | IP67 |
| Diagnostic Coverage (DC) | 0 % |
| Diameter | 12 mm |
| Housing material | brass, nickel-plated |
| Hysteresis | H | typ. 5 % |
| Installation | flush |
| Length | L | 2 m |
| Length 50 mm Diameter 12 mm | Length | 50 mm | Diameter | 12 mm |
| Mass | 86 g |
| Material | PVC |
| Mission Time (T M ) | 20 a |
| MTTF d | 1060 a |
| Number of cores | 3 |
| Output polarity | DC |
| Output type | PNP |
| Rated operating distance | s n | 2 mm |
| Reduction factor r 304 | 0.7 |
| Reduction factor r Al | 0.3 |
| Reduction factor r Cu | 0.2 |
| Reverse polarity protection | reverse polarity protected |
| Scope of delivery | 2 self locking nuts in scope of delivery |
| Sensing face | PBT , green |
| Short-circuit protection | pulsing |
| Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 |
| Standards EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 | Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 |
| Switching function | Normally open (NO) |
| Switching state indicator | LED, yellow |
| Tightening torque | ≤ 10 Nm |
| UL approval | cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC Output Switching Current: 200 mA |
| Wire end ferrules | yes |
Documents
No documents are linked to this part yet.