All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| Available voltage | ≥ 16 V at 20 mA ; ≥ 20 V at 4 mA , terminals 1+, 3; 4+, 6 |
| Current | I o | 93 mA |
| External supply (loop) | 2 ... 30 V DC If the external voltage is > 19 V, a load ≥ ((V - 19) / 0.02) Ω is required. V represents the value of the external voltage. The internal 250 Ω resistor at terminals 9 and 12 can be used as a load. |
| Input/power supply | safe electrical isolation acc. to IEC/EN 60079-11:2007, voltage peak value 375 V |
| Maximum safe voltage | U m | 250 V (Attention! The rated voltage can be lower.) |
| Maximum safe voltage U m 250 V (Attention! The rated voltage can be lower.) | Maximum safe voltage | U m | 250 V (Attention! The rated voltage can be lower.) |
| Open circuit voltage/short-circuit current | terminals 1+, 3; 4+, 6: 23 V / 25 mA |
| Output/power supply | functional insulation, rated insulation voltage 50 V AC |
| Power | P o | 634 mW |
| Power consumption | ≤ 2.6 W at maximum load |
| Power dissipation | ≤ 1.4 W at maximum load |
| Rated voltage | U r | 18 ... 30 V DC |
| Voltage | U o | 26.2 V |
| Voltage U i 30 V Current I i 115 mA Power P i max 1 W Voltage U o 2 V Current I o 8.5 mA Power P o 4.3 mW | Voltage | U i | 30 V | Current | I i | 115 mA | Power | P i | max 1 W | Voltage | U o | 2 V | Current | I o | 8.5 mA | Power | P o | 4.3 mW |
| Voltage U o 26.2 V Voltage U q 27.25 V Current I o 115 mA Power P o 784 mW | Voltage | U o | 26.2 V | Voltage | U q | 27.25 V | Current | I o | 115 mA | Power | P o | 784 mW |
| Voltage U o 26.2 V Voltage U q 27.25 V Current I o 93 mA Power P o 634 mW | Voltage | U o | 26.2 V | Voltage | U q | 27.25 V | Current | I o | 93 mA | Power | P o | 634 mW |
| AC and DC characteristics | |
| Frequency range | field side into the control side: band width with 1 V pp signal 0 ... 7.5 kHz (-3 dB) safe area to hazardous area: band width with 1 V SS signal 0.3 ... 7.5 kHz (-3 dB) |
| Protection against electrical shock | UL 61010-1:2012 |
| Ripple | within the supply tolerance |
| Rise time/fall time | 1 ms |
| Settling time | 2 ms |
| Environment and package | |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) extended ambient temperature range up to 70 °C (158 °F), refer to manual for necessary mounting conditions |
| Dimensions | 20 x 124 x 115 mm (0.8 x 4.9 x 4.5 inch) (W x H x D) , housing type B2 |
| Influence of ambient temperature | ≤ 0.25 µA/K |
| Influence of ambient temperature ≤ 0.25 µA/K | Influence of ambient temperature | ≤ 0.25 µA/K |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Other | |
| Certificate | CML 17 ATEX 3030X |
| Connection | Power Rail or terminals 14+, 15- |
| Connection side | field side |
| Control drawing | 116-0439 (cULus) |
| Control drawing 116-0439 (cULus) | Control drawing | 116-0439 (cULus) |
| Degree of protection | IEC 60529:2001 |
| Deviation | at 20 °C (68 °F), 4 ... 20 mA ≤ 10 µA incl. calibration, linearity, hysteresis, loads and fluctuations of supply voltage |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Directive 2014/30/EU EN 61326-1:2013 (industrial locations) | Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Directive 2014/34/EU | EN IEC 60079-0:2018+AC:2020 , EN 60079-7:2015+A1:2018 , EN IEC 60079-11:2024 |
| Directive 2014/34/EU EN IEC 60079-0:2018+AC:2020 , EN 60079-7:2015+A1:2018 , EN IEC 60079-11:2024 | Directive 2014/34/EU | EN IEC 60079-0:2018+AC:2020 , EN 60079-7:2015+A1:2018 , EN IEC 60079-11:2024 |
| Display elements | LED |
| Electromagnetic compatibility | NE 21:2012 EN 61326-3-2:2008 |
| Equipment | terminals 1+, 3-; 4+, 6- |
| EU-type examination certificate | CML 17 ATEX 2031X |
| IECEx certificate | IECEx CML 17.0016X |
| IECEx certificate IECEx CML 17.0016X IECEx marking [Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I Ex ec IIC T4 Gc | IECEx certificate | IECEx CML 17.0016X | IECEx marking | [Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I Ex ec IIC T4 Gc |
| IECEx marking | [Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I Ex ec IIC T4 Gc |
| Input | [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I |
| Input/Output | safe electrical isolation acc. to IEC/EN 60079-11:2007, voltage peak value 375 V |
| Input resistance | max. 265 Ω terminals 2-, 3; 5-, 6 , max. 330 Ω terminals 1+, 3; 4+, 6 |
| Input signal | 4 ... 20 mA |
| Labeling | space for labeling at the front |
| Load | 0 ... 600 Ω |
| Marking | II (1)G [Ex ia Ga] IIC [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I |
| Marking II (1)G [Ex ia Ga] IIC [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I Input [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I | Marking | II (1)G [Ex ia Ga] IIC [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I | Input | [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I |
| Marking II 3G Ex ec IIC T4 Gc | Marking | II 3G Ex ec IIC T4 Gc |
| Mass | approx. 200 g |
| Output/Output | functional insulation, rated insulation voltage 50 V AC |
| Output signal | 4 ... 20 mA (overload > 25 mA) |
| Safety Integrity Level (SIL) | SIL 2 |
| Signal type | Analog input |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Systematic capability (SC) | SC 3 |
| UL approval | E106378 |
Documents
No documents are linked to this part yet.