All alternatives

View full report

Technical parameters

Power
No-load supply currentI 0 | < 35 mA
Operating voltageU B | 10 ... 30 V DC , class 2
Switching currentmax. 200 mA
Switching voltage30 V DC
Voltage dropU d | ≤ 2.5 V DC
AC and DC characteristics
Ripple10 %
Switching frequencyf | 500 Hz
Environment and package
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Storage temperature-30 ... 70 °C (-22 ... 158 °F)
Other
Ambient light limit30000 Lux
CCC approvalCCC approval / marking not required for products rated ≤36 V
ConnectionM12 connector, 4-pin
Control elementsSensitivity adjuster, light/dark switch
Degree of protectionIP67
Detection rangeup to 300 mm (LME 18-2,3-0,5-K3)
Diagnostic Coverage (DC)0 %
Diameter18 mm
Function indicatorLED yellow, lights up with receiver lit
Housingbrass, nickel-plated
Housing brass, nickel-plated Optical face plasticHousing | brass, nickel-plated | Optical face | plastic
HysteresisH | < 15 %
Length65 mm
Length 65 mm Diameter 18 mmLength | 65 mm | Diameter | 18 mm
Light sourceLED, 650 nm visible red light
Light typemodulated visible red light
Mass60 g
Mission Time (T M )20 a
MTTF d700 a
Opening angle26 °
Operation indicatorLED green, flashes in case of short-circuit
Optical facefrontal
Product standardEN 60947-5-2
Protection classII , rated voltage ≤ 50 V AC with pollution degree 1-2 according to IEC 60664-1
Response time1 ms
Sensor rangeup to 70 mm (LMR 18-3,2-1,0-K4)
Signal output1 PNP output, short-circuit protected, reverse polarity protected, open collector
Switching typelight/dark on, switchable
UL approvalcULus Listed, Type 1 enclosure

Documents

No documents are linked to this part yet.