24375

Active

Inductive sensor

All alternatives

Technical parameters

Power
Current consumption	≤ 10 mA
Off-state current	I r \| ≤ 10 µA
Operating current	I L \| 0 ... 100 mA
Operating voltage	U B \| 10 ... 30 V DC
Voltage drop	U d \| ≤ 2 V
AC and DC characteristics
Switching frequency	f \| 0 ... 5 Hz
Environment and package
Ambient temperature	-25 ... 75 °C (-13 ... 167 °F)
Other
Actuating element	Ferrous targets
Assured operating distance	s a \| 0 ... 1.215 mm
CCC approval	CCC approval / marking not required for products rated ≤36 V
Connection type	Connector plug
Degree of protection	IP67
Diameter	8 mm
Housing material	stainless steel 1.4305 / AISI 303, black PTFE coated
Hysteresis	H \| 5 ... 15 typ. 10 %
Installation	flush
Length	40 mm
Length 40 mm Diameter 8 mm	Length \| 40 mm \| Diameter \| 8 mm
Mag. Field strength, AC fields	250 mT
Mag. Field strength, DC fields	250 mT
Number of pins	4
Output polarity	DC
Output type	PNP
Rated operating distance	s n \| 1.5 mm
Reduction factor r 304	0.6
Reduction factor r Al	0
Reduction factor r Brass	0
Reduction factor r Cu	0
Reduction factor r St37	1
Reverse polarity protection	reverse polarity protected
Sensing face	stainless steel 1.4305 / AISI 303, black PTFE coated
Short-circuit protection	pulsing
Standards	EN IEC 60947-5-2
Standards EN IEC 60947-5-2	Standards \| EN IEC 60947-5-2
Switching function	Normally open (NO)
Switching state indicator	LED, red
Threading	M12 x 1
Threading M12 x 1 Number of pins 4	Threading \| M12 x 1 \| Number of pins \| 4
UL approval	cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC Output Switching Current: 100 mA

Documents

No documents are linked to this part yet.