All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| No-load supply current | I 0 | ≤ 50 mA |
| Operating voltage | U B | 10 ... 30 V DC , ripple 10 % SS |
| Rated operating current | I e | 200 mA , short-circuit/overload protected |
| Voltage drop | U d | ≤ 2.5 V |
| AC and DC characteristics | |
| Repeat accuracy | ≤ 0.5 % of switching point |
| Response delay | approx. 50 ms |
| Switching frequency | f | ≤ 8 Hz |
| Transducer frequency | approx. 390 kHz |
| Environment and package | |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Height | 80 mm |
| Height 80 mm Width 34 mm Length 80 mm | Height | 80 mm | Width | 34 mm | Length | 80 mm |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Temperature influence | ± 1 % of full-scale value |
| Other | |
| Adjustment range | 50 ... 500 mm |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Common mode operation | max. 95 Hz |
| Common mode operation max. 95 Hz Multiplex operation ≤ 95/n Hz, n = number of sensors | Common mode operation | max. 95 Hz | Multiplex operation | ≤ 95/n Hz, n = number of sensors |
| Connection type | Connector plug M12 x 1 , 5-pin |
| Dead band | 0 ... 30 mm |
| Default setting | Switch point A1: 50 mm , Switch point A2: 500 mm , wide sound lobe |
| Degree of protection | IP54 |
| Housing | ABS |
| Housing ABS Transducer epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT | Housing | ABS | Transducer | epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT |
| LED green | solid green: Power on |
| LED red | normal operation: "fault" program function: no object detected |
| LED yellow 1 | solid: switching state switch output 1 flashing: program function |
| LED yellow 2 | solid: switching state switch output 2 flashing: program function |
| Length | 80 mm |
| Mass | 140 g |
| Multiplex operation | ≤ 95/n Hz, n = number of sensors |
| Output type | 2 switch outputs PNP, NO/NC selectable |
| Range hysteresis | H | 1 % of the set operating distance |
| Sensing range | 30 ... 500 mm |
| Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 |
| Standards EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 | Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 |
| Standard target plate | 100 mm x 100 mm |
| Synchronization | bi-directional 0 level -U B ...+1 V 1 level: +4 V...+U B input impedance: > 12 KOhm synchronization pulse: ≥ 100 µs, synchronization interpulse period: ≥ 2 ms |
| Transducer | epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT |
| UL approval | cULus Listed, Class 2 Power Source |
| Width | 34 mm |
Documents
No documents are linked to this part yet.