25111

Active

Inductive sensor

All alternatives

Technical parameters

Power
Momentary current (20 ms, 0.1 Hz)	0 ... 1600 mA
Off-state current	I r \| 0 ... 1.7 mA
Operating current	I L \| 5 ... 200 mA
Operating voltage	U B \| 20 ... 253 V
Operating voltage indicator	LED, green
Voltage drop	U d \| < 5 V (I L > 50 mA); < 8 V (I L < 50 mA)
AC and DC characteristics
Switching frequency	f \| 0 ... 20 Hz
Environment and package
Ambient temperature	-25 ... 70 °C (-13 ... 158 °F)
Other
Actual operating distance	s r \| 13.5 ... 16.5 mm
Assured operating distance	s a \| 0 ... 12.15 mm
Bending radius	> 10 x cable diameter
Cable diameter	6.4 mm ± 0.2 mm
CCC approval	Certified by China Compulsory Certification (CCC)
Color	grey
Connection type	cable
Core cross section	0.75 mm 2
CSA approval	cCSAus Listed, General Purpose
Degree of protection	IP67
Diameter	30 mm
Housing material	brass, nickel-plated
Hysteresis	H \| 1 ... 10 % typ. 5 %
Installation	quasi flush
Length	L \| 2 m
Length 50 mm Diameter 30 mm	Length \| 50 mm \| Diameter \| 30 mm
Material	PVC
Note	1) In the temperature range below 0 °C, permissible operating voltage U b 80...253 V Safety fuse ≤ 0.3 A (quick-blow) according to IEC 60127-2 Sheet 1 Recommendation: after a short circuit, check that the device is functioning correctly.
Number of cores	3
Output polarity	AC
Output type	Two-wire
Rated operating distance	s n \| 15 mm
Reduction factor r 304	0.81
Reduction factor r Al	0.33
Reduction factor r Cu	0.28
Reverse polarity protection	reverse polarity tolerant
Sensing face	PBT
Standards	EN IEC 60947-5-2
Standards EN IEC 60947-5-2	Standards \| EN IEC 60947-5-2
Switching function	Normally open (NO)
Switching state indicator	LED, yellow
UL approval	cULus Listed Load Type: Resistive Enclosure Type Rating: Type 1
Wire end ferrules	yes

Documents

No documents are linked to this part yet.