25422

Active

Inductive sensor

All alternatives

Technical parameters

Power
No-load supply current	I 0 \| ≤ 20 mA
Off-state current	I r \| 0 ... 0.5 mA
Operating current	I L \| 0 ... 200 mA
Operating voltage	U B \| 10 ... 60 V DC
Operating voltage indicator	LED, green
Voltage drop	U d \| ≤ 3 V
AC and DC characteristics
Switching frequency	f \| 0 ... 80 Hz
Time delay before availability	t v \| ≤ 300 ms
Environment and package
Ambient temperature	-25 ... 70 °C (-13 ... 158 °F)
Height	40 mm
Height 40 mm Width 84 mm Length 84 mm	Height \| 40 mm \| Width \| 84 mm \| Length \| 84 mm
Other
Assured operating distance	s a \| 0 ... 40.5 mm
CCC approval	Certified by China Compulsory Certification (CCC)
Connection type	screw terminals
Core cross section	up to 2.5 mm 2
Degree of protection	IP68
Diagnostic Coverage (DC)	0 %
Housing base	metal
Housing material	PBT
Hysteresis	H \| typ. 3 %
Information for connection	A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 %
Installation	flush
Length	84 mm
Maximum core cross-section	without wire end ferrules 2.5 mm 2 , with connector sleeves 1.5 mm 2
Minimum core cross-section	without wire end ferrules 0.5 mm 2 , with connector sleeves 0.34 mm 2
Mission Time (T M )	20 a
MTTF d	940 a
Output polarity	DC
Output type	PNP
Rated operating distance	s n \| 50 mm
Reduction factor r 304	0.83
Reduction factor r Al	0.38
Reduction factor r Cu	0.35
Reverse polarity protection	reverse polarity protected
Sensing face	PBT
Short-circuit protection	pulsing
Standards	EN IEC 60947-5-2
Standards EN IEC 60947-5-2	Standards \| EN IEC 60947-5-2
Switching function	Normally open (NO)
Switching state indicator	LED, yellow
UL approval	cULus Listed Load Type: Resistive Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 60 V DC Output Switching Current: 200 mA
Width	84 mm

Documents

No documents are linked to this part yet.