All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| No-load supply current | I 0 | ≤ 9 mA |
| Off-state current | I r | 0 ... 0.5 mA typ. 0.01 mA |
| Operating current | I L | 0 ... 200 mA |
| Operating voltage | U B | 10 ... 60 V |
| Voltage drop | U d | ≤ 2.8 V |
| Voltage drop I L = 100 mA, switching element on | U d | 1 ... 2.6 V typ. 1.8 V |
| Voltage drop I L = 10 mA, switching element on | U d | 0.9 ... 2.4 V typ. 1.7 V |
| Voltage drop I L = 200 mA, switching element on | U d | 1.2 ... 2.8 V typ. 2 V |
| Voltage drop I L = 20 mA, switching element on | U d | 0.9 ... 2.4 V typ. 1.7 V |
| Voltage drop I L = 50 mA, switching element on | U d | 0.9 ... 2.5 V typ. 1.7 V |
| AC and DC characteristics | |
| Switching frequency | f | 0 ... 800 Hz |
| Time delay before availability | t v | ≤ 50 ms |
| Environment and package | |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature | -25 ... 85 °C (-13 ... 185 °F) |
| Other | |
| Actual operating distance | s r | 9 ... 11 mm typ. 10 mm |
| Assured operating distance | s a | 0 ... 8.1 mm |
| Core cross section | 0.75 mm 2 |
| Degree of protection | IP68 |
| Diameter | 30 mm |
| Housing material | PBT |
| Hysteresis | H | 1 ... 15 typ. 5 % |
| Installation | flush |
| Length | 50 mm |
| Length 50 mm Diameter 30 mm | Length | 50 mm | Diameter | 30 mm |
| Output polarity | DC |
| Output type | PNP |
| Rated operating distance | s n | 10 mm |
| Reduction factor r 304 | 0.66 |
| Reduction factor r Al | 0.22 |
| Reduction factor r Brass | 0.33 |
| Reduction factor r Cu | 0.19 |
| Reverse polarity protection | reverse polarity protected |
| Sensing face | PBT |
| Short-circuit protection | pulsing |
| Standards | IEC / EN 60947-5-2:2004 |
| Switching function | Normally open (NO) |
| Switching state indicator | - |
Documents
No documents are linked to this part yet.