28337

Active

Inductive ring sensor

All alternatives

Technical parameters

Power
Measuring plate not detected ≥ 3 mA at nominal voltage Measuring plate detected ≤ 1 mA at nominal voltage	Measuring plate not detected \| ≥ 3 mA at nominal voltage \| Measuring plate detected \| ≤ 1 mA at nominal voltage
Nominal voltage	U o \| 8.2 V (R i approx. 1 kΩ)
Operating voltage	U B \| 5 ... 25 V
AC and DC characteristics
Switching frequency	f \| 0 ... 1500 Hz
Environment and package
Ambient temperature	-20 ... 65 °C (-4 ... 149 °F)
Height	32.5 mm
Height 32.5 mm Width 25 mm Length 20 mm	Height \| 32.5 mm \| Width \| 25 mm \| Length \| 20 mm
Storage temperature	-40 ... 100 °C (-40 ... 212 °F)
Other
Bending radius	> 10 x cable diameter
Bending radius > 10 x cable diameter	Bending radius \| > 10 x cable diameter
Connection type	cable PVC , 2 m Crimp terminal sockets 60888-3, AMP
Core cross section	0.14 mm 2
Degree of protection	IP67
Diagnostic Coverage (DC)	0 %
Equipment protection level Gb	PTB 99 ATEX 2128 X
Equipment protection level Gb PTB 99 ATEX 2128 X	Equipment protection level Gb \| PTB 99 ATEX 2128 X
Housing material	PBT
Inside diameter	15 mm
Length	20 mm
Mass	36 g
Measuring cone	6 mm, 1.4305 / AISI 303
Measuring plate detected	≤ 1 mA at nominal voltage
Measuring plate not detected	≥ 3 mA at nominal voltage
Mission Time (T M )	20 a
MTTF d	5990 a
NAMUR	EN 60947-5-6:2000 IEC 60947-5-6:1999
NAMUR EN 60947-5-6:2000 IEC 60947-5-6:1999 Standards EN IEC 60947-5-2	NAMUR \| EN 60947-5-6:2000 IEC 60947-5-6:1999 \| Standards \| EN IEC 60947-5-2
Output type	NAMUR
Standards	EN IEC 60947-5-2
Switching function	Normally closed (NC)
UL approval	cULus Listed Load Type: Resistive Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 8.2 V DC
Use in the hazardous area	see instruction manuals
Width	25 mm

Documents

No documents are linked to this part yet.