29132

Active

Inductive sensor

All alternatives

Power
No-load supply current	I 0 \| ≤ 15 mA
Off-state current	I r \| ≤ 10 µA
Operating current	I L \| 0 ... 100 mA
Operating voltage	U B \| 5 V -5% +10%
Voltage drop	U d \| ≤ 1.5 V
AC and DC characteristics
Switching frequency	f \| 0 ... 800 Hz
Time delay before availability	t v \| ≤ 20 ms
Environment and package
Ambient temperature	15 ... 35 °C (59 ... 95 °F)
Height	4.7 mm
Height 4.7 mm Width 8 mm Length 16 mm	Height \| 4.7 mm \| Width \| 8 mm \| Length \| 16 mm
Other
Assured operating distance	s a \| 0 ... 1.8 mm
Connection assembly	Molex socket housing 51021-0300 Molex crimp 50058-8000
Connection type	flexible leads PVC , 280 mm , twisted
Core cross section	0.08 mm 2
Degree of protection	IP67
Diagnostic Coverage (DC)	0 %
Housing material	PA
Hysteresis	H \| typ. 5 %
Installation	non-flush
Length	16 mm
Mission Time (T M )	20 a
MTTF d	4830 a
Output polarity	DC
Output type	PNP
Rated operating distance	s n \| 2 mm
Reduction factor r 304	0.7
Reduction factor r Al	0.3
Reduction factor r Cu	0.2
Reverse polarity protection	no
Sensing face	PA
Short-circuit protection	pulsing
Standards	EN IEC 60947-5-2
Standards EN IEC 60947-5-2	Standards \| EN IEC 60947-5-2
Switching function	Normally open (NO)
UL approval	cULus Listed Load Type: Resistive Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 5 V DC Output Switching Current: 100 mA
Width	8 mm

No documents are linked to this part yet.