3004

Active

Inductive sensor

All alternatives

Technical parameters

Power
No-load supply current	I 0 \| ≤ 10 mA
Off-state current	I r \| 0 ... 0.5 mA typ. 0.1 µA at 25 °C
Operating current	I L \| 0 ... 100 mA
Operating voltage	U B \| 4.75 ... 30 V DC
Voltage drop	U d \| ≤ 3 V
AC and DC characteristics
Switching frequency	f \| 0 ... 1000 Hz
Time delay before availability	t v \| ≤ 5 ms
Environment and package
Ambient temperature	-25 ... 70 °C (-13 ... 158 °F)
Height	6 mm
Height 6 mm Width 10 mm Length 27 mm	Height \| 6 mm \| Width \| 10 mm \| Length \| 27 mm
Storage temperature	-40 ... 85 °C (-40 ... 185 °F)
Other
Alternating magnetic field	B \| 200 mT
Assured operating distance	s a \| 0 ... 3.24 mm
Bending radius	> 10 x cable diameter
Cable diameter	3.5 mm ± 0.2 mm
CCC approval	CCC approval / marking not required for products rated ≤36 V
Color	grey
Connection type	cable
Constant magnetic field	B \| 200 mT
Core cross section	0.14 mm 2
Degree of protection	IP67
Diagnostic Coverage (DC)	0 %
Housing material	PPS
Hysteresis	H \| typ. 5 %
Installation	non-flush
Length	L \| 2 m
Material	PVC
Mission Time (T M )	20 a
MTTF d	1680 a
Number of cores	3
Output polarity	DC
Output type	PNP
Rated operating distance	s n \| 4 mm
Reduction factor r 304	0.7
Reduction factor r Al	0.4
Reduction factor r Cu	0.3
Reverse polarity protection	reverse polarity protected
Sensing face	PPS
Short-circuit protection	pulsing
Standards	EN IEC 60947-5-2
Standards EN IEC 60947-5-2	Standards \| EN IEC 60947-5-2
Switching function	Normally open (NO)
Switching state indicator	LED, yellow
UL approval	cULus Listed Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC Output Switching Current: 100 mA
Width	10 mm
Wire end ferrules	yes

Documents

No documents are linked to this part yet.