All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| No-load supply current | I 0 | ≤ 35 mA |
| Off-state current | I r | ≤ 100 µA |
| Operating current | I L | ≤ 200 mA |
| Operating voltage | U B | 10 ... 30 V DC |
| Voltage drop | U d | ≤ 2 V DC |
| AC and DC characteristics | |
| Switching frequency | f | 0 ... 30 Hz |
| Environment and package | |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Other | |
| Assured operating distance | s a | 0 ... 1.62 mm |
| Connection type | Connector plug |
| Degree of protection | IP67 |
| Hysteresis | H | 10 ... 20 % typ. 15 % |
| Installation | flush |
| LED green | Power on |
| LED yellow | Output status |
| Mag. Field strength, AC fields | 250 mT |
| Mag. Field strength, DC fields | 100 mT |
| Mass | 161 g |
| Material | Housing: zinc Probe: aluminum |
| Note | X = 2.062 in (52.4 mm) |
| Number of pins | 4 |
| Operating pressure dynamically | 1000 psi |
| Output polarity | DC |
| Output type | PNP/NPN |
| Rated operating distance | s n | 2 mm |
| Reduction factor r 304 | 0.85 |
| Reduction factor r Al | 0.4 |
| Reverse polarity protection | yes |
| Short-circuit protection | yes |
| Standards | EN 60947-5-2 |
| Switching function | Normally open (NO) |
| Threading | M12 x 1 |
| Threading M12 x 1 Number of pins 4 | Threading | M12 x 1 | Number of pins | 4 |
| UL approval | cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC Output Switching Current: 200 mA |
Documents
No documents are linked to this part yet.