40276

Active

Inductive sensor

All alternatives

Technical parameters

Power
Off-state current	I r \| ≤ 1 mA
Operating current	I L \| 2 ... 100 mA
Operating voltage	U B \| 6 ... 30 V DC
Voltage drop	U d \| ≤ 5.5 V DC
AC and DC characteristics
Switching frequency	f \| 15 Hz
Environment and package
Ambient temperature	-40 ... 70 °C (-40 ... 158 °F)
Other
Actuating element	Ferrous targets
Assured operating distance	s a \| 0 ... 4.05 mm
CCC approval	CCC approval / marking not required for products rated ≤36 V
Connection type	Connector plug
Degree of protection	IP67 / IP68 / IP69K - cordset dependent according to cable specification
Diameter	18 mm
Housing material	Stainless steel 1.4305 / AISI 303
Hysteresis	H \| 3 ... 15 typ. 5 %
Installation	flush
Length	65 mm
Length 65 mm Diameter 18 mm	Length \| 65 mm \| Diameter \| 18 mm
Mass	66 g
Number of pins	3
Operation indicator	4-way LED Yellow: output
Output polarity	DC
Output type	Two-wire
Rated operating distance	s n \| 5 mm
Reduction factor r 304	0.75
Reduction factor r Al	0
Reduction factor r Brass	0
Reduction factor r Cu	0
Reduction factor r St37	1
Reverse polarity protection	reverse polarity tolerant
Sensing face	Stainless steel 1.4305 / AISI 303
Short-circuit protection	no
Standards	EN IEC 60947-5-2
Standards EN IEC 60947-5-2	Standards \| EN IEC 60947-5-2
Switching function	Normally open (NO)
Threading	M12 x 1
Threading M12 x 1 Number of pins 3	Threading \| M12 x 1 \| Number of pins \| 3
UL approval	cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC Output Switching Current: 100 mA

Documents

No documents are linked to this part yet.