41728

Active

Through-beam ultrasonic barrier

All alternatives

Technical parameters

Power
No-load supply current	I 0 \| ≤ 20 mA
Operating voltage	U B \| 10 ... 30 V DC , ripple 10 % SS
Rated operating current	I e \| 200 mA , short-circuit/overload protected
Voltage drop	U d \| ≤ 3 V
AC and DC characteristics
Switching frequency	f \| ≤ 100 Hz
Switch-on delay	t on \| < 5 ms
Transducer frequency	approx. 255 kHz
Environment and package
Ambient temperature	-25 ... 70 °C (-13 ... 158 °F)
Storage temperature	-40 ... 85 °C (-40 ... 185 °F)
Other
CCC approval	CCC approval / marking not required for products rated ≤36 V
Connection type	Connector plug M12 x 1 , 4-pin
Degree of protection	IP68 / IP69K
Diameter	18 mm
Housing	Stainless steel 1.4435 / AISI 316L O-ring for cover sealing: EPDM
Housing Stainless steel 1.4435 / AISI 316L O-ring for cover sealing: EPDM Transducer PTFE (diaphragm surface)	Housing \| Stainless steel 1.4435 / AISI 316L O-ring for cover sealing: EPDM \| Transducer \| PTFE (diaphragm surface)
Input type	1 program input [receiver] switch point 1: -U B ... +1 V, switch point 2: +6 V ... +U B input impedance: > 4.7 kΩ pulse duration: ≥ 1 s 1 test input [emitter] emitter deactivated: +6 V ... +U B input impedance: > 4.7 kΩ
Length	40 mm
Length 40 mm Diameter 18 mm	Length \| 40 mm \| Diameter \| 18 mm
Mass	25 g
Output type	PNP, NO
Sensing range	100 ... 300 mm
Standards	EN IEC 60947-5-2:2020 IEC 60947-5-2:2019
Standards EN IEC 60947-5-2:2020 IEC 60947-5-2:2019	Standards \| EN IEC 60947-5-2:2020 IEC 60947-5-2:2019
Standard target plate	100 mm x 100 mm
Transducer	PTFE (diaphragm surface)
UL approval	cULus Listed, Class 2 Power Source

Documents

No documents are linked to this part yet.