472

Active

Inductive sensor

All alternatives

Technical parameters

Power
No-load supply current	I 0 \| ≤ 25 mA
Off-state current	I r \| 0 ... 0.5 mA typ. 0.1 µA at 25 °C
Operating current	I L \| 0 ... 100 mA
Operating voltage	U B \| 10 ... 30 V DC
Operating voltage indicator	LED, green
Voltage drop	U d \| ≤ 3 V
AC and DC characteristics
Switching frequency	f \| 0 ... 500 Hz
Time delay before availability	t v \| ≤
Environment and package
Ambient temperature	-25 ... 70 °C (-13 ... 158 °F)
Height	33.5 mm
Height 33.5 mm Width 65 mm Length 36 mm	Height \| 33.5 mm \| Width \| 65 mm \| Length \| 36 mm
Other
Actual operating distance	s r \| 2.7 ... 3.3 mm typ.
Assured operating distance	s a \| 0 ... 2.43 mm
Bending radius	> 10 x cable diameter
Cable diameter	6.8 mm ± 0.2 mm
Cable diameter 6.8 mm ± 0.2 mm Bending radius > 10 x cable diameter	Cable diameter \| 6.8 mm ± 0.2 mm \| Bending radius \| > 10 x cable diameter
CCC approval	CCC approval / marking not required for products rated ≤36 V
Connection (system side)	PVC cable 5 m
Core cross section (system side)	0.75 mm 2
Degree of protection	IP67
Diagnostic Coverage (DC)	0 %
Housing material	PBT
Hysteresis	H \| typ. 5 %
Installation	flush mountable
Length	36 mm
Mission Time (T M )	20 a
MTTF d	780 a
Output polarity	DC
Output type	PNP
Rated operating distance	s n \| 3 mm
Reduction factor r 304	1
Reduction factor r Al	0.5
Reduction factor r Cu	0.4
Reduction factor r St37	1.2
Reverse polarity protection	all connections
Sensing face	PBT
Short-circuit protection	pulsing
Standards	EN IEC 60947-5-2
Standards EN IEC 60947-5-2	Standards \| EN IEC 60947-5-2
Switching function	2 x normally open (NO)
Switching state indicator	LED, yellow
Tightening torque, fastening screws	≤ 5 Nm
UL approval	cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC Output Switching Current: 100 mA
Width	65 mm

Documents

No documents are linked to this part yet.