All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| Current | ≤ 72 mA at U i = 19 V, ≤ 50 mA at U i = 30 V with 265 Ω output load ≤ 45 mA at U i = 19 V, ≤ 31 mA at U i = 30 V with shorted output ≤ 14 mA at U i = 19 V, ≤ 11 mA at U i = 30 V no load at output |
| Input/Output safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V | Input/Output | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Inrush current | ≤ 200 mA after 100 µs |
| Maximum safe voltage | U m | 250 V (Attention! The rated voltage can be lower.) |
| Maximum safe voltage U m 250 V (Attention! The rated voltage can be lower.) | Maximum safe voltage | U m | 250 V (Attention! The rated voltage can be lower.) |
| Open loop voltage | U s | ≥ 22.7 V |
| Power | P o | 693 mW |
| Power dissipation | < 1 W |
| Rated voltage | U r | 19 ... 30 V DC loop powered |
| Voltage | U e | ≥ 12 V |
| AC and DC characteristics | |
| Energized/De-energized delay | single operation: typ. 1.7 ms/50 µs; periodical: typ. 5 µs/50 µs |
| Protection against electrical shock | EN 61010-1:2010 |
| Environment and package | |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Dimensions | 12.5 x 106 x 128 mm (0.5 x 4.2 x 5.1 inch) (W x H x D) |
| Height | 106 mm |
| Height 106 mm Width 12.5 mm Depth 128 mm | Height | 106 mm | Width | 12.5 mm | Depth | 128 mm |
| Mounting | on termination board |
| Other | |
| Certificate | PF 08 CERT 1048 X |
| Coding | pin 1 and 4 trimmed For further information see system description. |
| Connection | loop powered |
| Connection side | control side |
| Control drawing | 16-534FM-12 (cFMus) |
| Control drawing 16-534FM-12 (cFMus) | Control drawing | 16-534FM-12 (cFMus) |
| Degree of protection | IEC 60529:2001 |
| Depth | 128 mm |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Directive 2014/30/EU EN 61326-1:2013 (industrial locations) | Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010 |
| Directive 2014/34/EU EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010 | Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010 |
| Display elements | LED |
| Electromagnetic compatibility | NE 21:2006 For further information see system description. |
| EU-type examination certificate | BASEEFA 06 ATEX 0171X |
| IECEx certificate | IECEx BAS 06.0031X |
| IECEx certificate IECEx BAS 06.0031X IECEx marking [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I | IECEx certificate | IECEx BAS 06.0031X | IECEx marking | [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I |
| IECEx marking | [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I |
| Input/Output | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Internal resistor | R i | ≤ 238 Ω |
| Labeling | space for labeling at the front |
| Marking | II (1)G [Ex ia Ga] IIC, II (1)D [Ex ia Da] IIIC, I (M1) [Ex ia Ma] I (-20 °C ≤ T amb ≤ 60 °C) |
| Marking II 3G Ex nA IIC T4 Gc | Marking | II 3G Ex nA IIC T4 Gc |
| Mass | approx. 100 g |
| Output | [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I |
| Output signal | These values are valid for the rated operating voltage 19 ... 30 V DC. |
| Safety Integrity Level (SIL) | SIL 3 |
| Signal type | Digital Output |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Width | 12.5 mm |
Documents
No documents are linked to this part yet.