All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| No-load supply current | I 0 | ≤ 40 mA |
| Operating voltage | U B | 10 ... 30 V DC |
| Switching current | max. 200 mA |
| Switching voltage | max. 30 V DC |
| AC and DC characteristics | |
| Ripple | 10 % |
| Switching frequency | f | 1000 Hz |
| Environment and package | |
| Ambient temperature | -40 ... 60 °C (-40 ... 140 °F) |
| Height | 88 mm |
| Height 88 mm Width 25.8 mm Depth 65.5 mm | Height | 88 mm | Width | 25.8 mm | Depth | 65.5 mm |
| Storage temperature | -40 ... 60 °C (-40 ... 140 °F) |
| Other | |
| Ambient light limit | 80000 Lux |
| Connection | terminal compartment with 8 spring-loaded terminals for wire cross section 0.5 ... 1.5 mm 2 , insulation stripping 7.5 ... 8.5 mm, M16 x 1.5 cable gland |
| Control elements | sensitivity adjustment (Adjustment to < 25% of the effective operating range) , Light-on/dark-on changeover switch |
| Degree of protection | IP67 |
| Depth | 65.5 mm |
| Diagnostic Coverage (DC) | 90 % |
| Diameter of the light spot | approx. 290 mm at a distance of 17 m |
| Effective detection range | 0 ... 17 m |
| Function indicator | 2 LEDs yellow, light up when light beam is free, flash when falling short of the operating reserve, are off when light beam is interrupted |
| Housing | plastic |
| Housing plastic Optical face plastic | Housing | plastic | Optical face | plastic |
| Light source | LED |
| Light type | modulated visible red light , 660 nm |
| Mass | approx. 112 g |
| Mission Time (T M ) | 20 a |
| MTTF d | 690 a |
| Opening angle | emitter 1.2° receiver 2° |
| Operation indicator | LED green |
| Optical face | plastic |
| Polarization filter | yes |
| Product standard | EN 60947-5-2 |
| Reference target | H85-2 reflector |
| Reflector distance | 0.05 ... 17 m |
| Response time | 0.5 ms |
| Signal output | 1 NPN, 1 PNP synchronized-switching, short-circuit protected, reverse polarity protected , open collectors |
| Stability alarm output | 1 PNP, inactive when falling short of the operating reserve for 10;s immediately inactive if 4 light beam interruptions take place |
| Switching type | light/dark on, switchable (selectable, light/dark switching is only activated if the receiver has 'dark on' selected.) |
| Test input | emitter deactivation at +U B |
| Threshold detection range | 21 m |
| Timer function | ON delay (GAN), OFF delay (GAB), one shot (IAB), ON delay-one shot (GAN-IAB), ON delay-OFF delay (GAN-GAB), programmable adjustment interval 0.02 s ... 1 s |
| UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
| Width | 25.8 mm |
Documents
No documents are linked to this part yet.