Pepperl+Fuchs, Inc.Germany
56053
ActiveRobust thru-beam sensor, compact housing design, 16 m detection range, emission frequency F2, red light and infrared light, dark on, PNP output, stability alarm output, test input, M12 plug
All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| No-load supply current | I 0 | max. 30 mA |
| Operating voltage | U B | 10 ... 30 V DC , class 2 |
| Switching current | max. 100 mA |
| Switching voltage | max. 30 V DC |
| Voltage drop | U d | ≤ 2.5 V DC |
| AC and DC characteristics | |
| Ripple | max. 10 % |
| Switching frequency | f | 1000 Hz |
| Environment and package | |
| Ambient temperature | -40 ... 60 °C (-40 ... 140 °F) |
| Height | 56.5 mm |
| Height 56.5 mm Width 31 mm Depth 13.6 mm | Height | 56.5 mm | Width | 31 mm | Depth | 13.6 mm |
| Storage temperature | -40 ... 75 °C (-40 ... 167 °F) |
| Other | |
| Ambient light limit | 50000 Lux |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Connection | 4-pin, M12 x 1 connector |
| Connector | metal |
| Control elements | sensitivity adjustment (receiver) |
| Control input | High power mode activation with +UB (emitter) |
| Degree of protection | IP67 |
| Depth | 13.6 mm |
| Diagnostic Coverage (DC) | 0 % |
| Diameter of the light spot | approx. 500 mm at detection range 16 m |
| Effective detection range | 0 ... 16 m |
| EMC Directive 2004/108/EC | EN 60947-5-2:2007 |
| EMC Directive 2004/108/EC EN 60947-5-2:2007 | EMC Directive 2004/108/EC | EN 60947-5-2:2007 |
| Emitter | M41-F2/76a/92 |
| Function indicator | Receiver: LED yellow, lights up when light beam is free, flashes when falling short of the operating reserve ; OFF when light beam is interrupted |
| Housing | Aluminum , Delta-Seal coated |
| Housing Aluminum , Delta-Seal coated Optical face glass pane Connector metal | Housing | Aluminum , Delta-Seal coated | Optical face | glass pane | Connector | metal |
| Light source | normal mode: LED High power mode: LED+IRED |
| Light type | normal mode: modulated visible red light High power mode: Red and infrared, modulated light |
| Mass | 50 g (device) |
| Mission Time (T M ) | 20 a |
| MTTF d | 844 a |
| Opening angle | approx. 1.5 ° |
| Operation indicator | LED green: power on |
| Optical face | frontal |
| Product standard | EN 60947-5-2:2007 IEC 60947-5-2:2007 |
| Product standard EN 60947-5-2:2007 IEC 60947-5-2:2007 Standards UL 508 | Product standard | EN 60947-5-2:2007 IEC 60947-5-2:2007 | Standards | UL 508 |
| Receiver | MV41-F2/82b/92/103 |
| Response time | 0.5 ms |
| Signal output | 1 PNP, short-circuit protected, reverse polarity protected, open collector |
| Stability alarm output | 1 PNP, inactive when falling short of the operating reserve |
| Standards | UL 508 |
| Switching type | dark-on |
| Test input | emitter deactivation at +U B (emitter) |
| Threshold detection range | normal mode: 25 m High power mode: 35 m (Control input at UB+) |
| UL approval | cULus Listed, Class 2 Power Source, Type 1 enclosure |
| Width | 31 mm |
Documents
No documents are linked to this part yet.