Pepperl+Fuchs, Inc.Germany
56682
ActiveRobust fiber optic sensor for glass fiber optics, red light, push-pull output, M8 plug
All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| No-load supply current | I 0 | max. 40 mA |
| Operating voltage | U B | 10 ... 30 V DC |
| Switching current | max. 100 mA |
| Switching voltage | max. 30 V DC |
| Voltage drop | U d | ≤ 2.5 V DC |
| AC and DC characteristics | |
| Ripple | max. 10 % |
| Switching frequency | f | 1000 Hz |
| Environment and package | |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Height | 56.5 mm |
| Height 56.5 mm Width 31 mm Depth 13.6 mm | Height | 56.5 mm | Width | 31 mm | Depth | 13.6 mm |
| Storage temperature | -40 ... 75 °C (-40 ... 167 °F) |
| Other | |
| Adjustment range | 0 ... 120 mm on Kodak white, reflection factor 90% |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Connection | M8 x 1 connector, 4-pin |
| Connector | metal |
| Control elements | Sensitivity adjuster, light/dark switch |
| Degree of protection | IP65 |
| Depth | 13.6 mm |
| Diagnostic Coverage (DC) | 0 % |
| Fiber optic adapter | 04 |
| Function indicator | LED yellow, lights up with receiver lit ; flashes when falling short of the operating reserve |
| Housing | Aluminum , Delta-Seal coated |
| Housing Aluminum , Delta-Seal coated Optical face Fiber optic connection Connector metal | Housing | Aluminum , Delta-Seal coated | Optical face | Fiber optic connection | Connector | metal |
| Light source | LED |
| Light type | modulated visible red light , 660 nm |
| Mass | 50 g |
| Mission Time (T M ) | 20 a |
| MTTF d | 770 a |
| Operation indicator | LED green, statically lit Power on , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz) |
| Optical face | Fiber optic connection |
| Product standard | EN 60947-5-2 |
| Reference target | 100 mm x 100 mm on Kodak white, reflection factor 90% |
| Response time | 0.5 ms |
| Sensor range | on black (6 %): up to 36 mm on Kodak white, reflection factor 90% up to 120 mm with LLR 04-1.6-0.5-WC3 fiberoptic cable |
| Signal output | 2 push-pull (4 in 1) outputs, complementary, short-circuit proof, reverse polarity protected |
| Switching type | light/dark on switchable The switching modes specified in the "Electrical Connection" section apply to L/D switches in the "D" position (dark switch) |
| UL approval | cULus Listed 57M3 (Only in association with UL Class 2 power supply; Type 1 enclosure) |
| Width | 31 mm |
Documents
No documents are linked to this part yet.