84665

Active

Triangulation sensor with background suppression for standard applications, flat design, M3 mounting, 15 mm sensing range, red light, light on, NPN output, fixed cable

See alternatives Ask AI FAE

All alternatives

View full report

Technical parameters

Power
No-load supply current	I 0 \| < 10 mA
Operating voltage	U B \| 12 ... 24 V
Switching current	max. 50 mA
Switching voltage	max. 30 V DC
Voltage drop	U d \| ≤ 1.5 V DC
AC and DC characteristics
Switching frequency	f \| approx. 2 kHz
Environment and package
Ambient temperature	-10 ... 60 °C (14 ... 140 °F)
Height	25.5 mm
Height 25.5 mm Width 16 mm Depth 4.1 mm	Height \| 25.5 mm \| Width \| 16 mm \| Depth \| 4.1 mm
Object size	typ. starts from 0.05 mm @ 14 mm
Storage temperature	-20 ... 70 °C (-4 ... 158 °F)
Other
Ambient light limit	EN 60947-5-2 : 25000 Lux
Angle deviation	approx. 0.5 °
Beam divergence	> 5 mrad
Black-white difference (6 %/90 %)	< 15 % at 15 mm
Cable	PUR
Cable length	2 m
CCC approval	CCC approval / marking not required for products rated ≤36 V
Connection	2 m fixed cable
Degree of protection	IP67
Depth	4.1 mm
Detection range	2 ... 15 mm
Diagnostic Coverage (DC)	0 %
Diameter of the light spot	1.4 mm +/- 1 mm at a distance of 15 mm
FDA approval	IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed. 3 as described in Laser Notice 56, dated May 8, 2019.
Function indicator	LED yellow ON: lights when object is detected
Housing	PC (Polycarbonate) and Stainless steel
Housing PC (Polycarbonate) and Stainless steel Optical face PMMA Cable PUR	Housing \| PC (Polycarbonate) and Stainless steel \| Optical face \| PMMA \| Cable \| PUR
Laser class	1
Laser safety	IEC 60825-1:2014
Light source	LASER LIGHT
Light type	modulated visible red light , 680 nm
Mass	approx. 20 g
max. pulse energy	8 nJ
Mission Time (T M )	10 a
MTTF d	800 a
Note	LASER LIGHT , DO NOT STARE INTO BEAM
Opening angle	approx. 1 °
Operation indicator	LED green, statically lit Power on , short-circuit : LED green flashing (approx. 4 Hz)
Optical face	frontal
Product standard	EN 60947-5-2
Protection class	III
Pulse length	approx. 3 µs
Reference target	standard white, 100 mm x 100 mm
Repetition rate	approx. 16.6 kHz
Response time	250 µs
Signal output	1 NPN output, short-circuit protected, reverse polarity protected, open collector
Switching type	NO contact / light-on
Tightening torque, fastening screws	1 Nm
UL approval	E87056 , cULus Recognized, Class 2 Power Source
Wave length	680 nm
Width	16 mm

Documents

No documents are linked to this part yet.