85048

Active

Thru-beam sensor, flat design, M3 mounting, 500 mm detection range, red light, dark on, PNP output, fixed cable

All alternatives

Technical parameters

Power
No-load supply current	I 0 \| Emitter: ≤ 10 mA Receiver: ≤ 8 mA
Operating voltage	U B \| 12 ... 24 V
Switching current	max. 50 mA , resistive load
Switching voltage	max. 30 V DC
Voltage drop	U d \| ≤ 1.5 V DC
AC and DC characteristics
Switching frequency	f \| approx. 2 kHz
Environment and package
Ambient temperature	-10 ... 60 °C (14 ... 140 °F)
Height	25.5 mm
Height 25.5 mm Width 16 mm Depth 4.1 mm	Height \| 25.5 mm \| Width \| 16 mm \| Depth \| 4.1 mm
Object size	typ. starts from 0.5 mm ; typ. from 0.25 mm (after teach-in)
Storage temperature	-20 ... 70 °C (-4 ... 158 °F)
Other
Ambient light limit	EN 60947-5-2 : 25000 Lux
Angle deviation	approx. 0.5 °
Beam divergence	> 5 mrad
Cable	PUR
Cable length	2 m
CCC approval	CCC approval / marking not required for products rated ≤36 V
Connection	2 m fixed cable
Degree of protection	IP67
Depth	4.1 mm
Diagnostic Coverage (DC)	0 %
Diameter of the light spot	approx. 4 mm at a distance of 500 mm
Effective detection range	0 ... 500 mm
Emitter	OBE500-R3F-S-L
FDA approval	IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed. 3 as described in Laser Notice 56, dated May 8, 2019.
Function indicator	Receiver: LED yellow, lights up when light beam is free, flashes when falling short of the operating reserve ; OFF when light beam is interrupted
Housing	PC (Polycarbonate) and Stainless steel
Housing PC (Polycarbonate) and Stainless steel Optical face PMMA Cable PUR	Housing \| PC (Polycarbonate) and Stainless steel \| Optical face \| PMMA \| Cable \| PUR
Laser class	1
Laser safety	IEC 60825-1:2014
Light source	LASER LIGHT
Light type	modulated visible red light , 680 nm
Mass	approx. 20 g per sensor
max. pulse energy	8 nJ
Mission Time (T M )	10 a
MTTF d	806 a
Note	LASER LIGHT , DO NOT STARE INTO BEAM
Opening angle	approx. 1 °
Operation indicator	LED green, statically lit Power on , short-circuit : LED green flashing (approx. 4 Hz)
Optical face	frontal
Product standard	EN 60947-5-2
Protection class	III
Pulse length	approx. 3 µs
Receiver	OBE500-R3F-E2-L
Repetition rate	approx. 16.6 kHz
Response time	250 µs
Signal output	1 PNP output, short-circuit protected, reverse polarity protected, open collector
Switching threshold	Teach-In input
Switching type	NO contact / dark-on
Test input	Test of switching function at 0 V
Threshold detection range	700 mm
Tightening torque, fastening screws	1 Nm
UL approval	E87056 , cULus Recognized, Class 2 Power Source
Wave length	680 nm
Width	16 mm

Documents

No documents are linked to this part yet.