89132

Active

Retroreflective sensor with polarization filter for clear object detection

All alternatives

Technical parameters

Power
No-load supply current	I 0 \| < 25 mA at 24 V supply voltage
Operating voltage	U B \| 10 ... 30 V DC
Switching current	max. 100 mA , resistive load
Switching voltage	max. 30 V DC
Voltage drop	U d \| ≤ 1.5 V DC
AC and DC characteristics
Ripple	max. 10 %
Switching frequency	f \| 500 Hz
Environment and package
Ambient temperature	-20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains
Height	37.1 mm
Height 37.1 mm Width 11 mm Depth 21.5 mm	Height \| 37.1 mm \| Width \| 11 mm \| Depth \| 21.5 mm
Storage temperature	-40 ... 70 °C (-40 ... 158 °F)
Other
Ambient light limit	EN 60947-5-2
Cable length	0.3 m
Communication interface	IEC 61131-9
Compatible master port type	A
Connection	300 mm fixed cable with M12 x 1, 4-pin connector
Contrast detection levels	10 % - clean, water filled PET bottles 18 % - clear glass bottles 40 % - colored glass or opaque materials Adjustable via rotary switch
Control elements	Teach-In key
Degree of protection	IP67 / IP69 / IP69K
Depth	21.5 mm
Device ID	0x110A07 (1116679)
Diagnostic Coverage (DC)	0 %
Diameter of the light spot	approx. 170 mm at a distance of 3.5 m
Effective detection range	0 ... 3.5 m in TEACH mode ; 0 ... 5 m at switch position "N"
Function indicator	Yellow LED: Permanently lit - light path clear Permanently off - object detected Flashing (4 Hz) - insufficient operating reserve
Housing	PC (Polycarbonate)
Housing PC (Polycarbonate) Optical face PMMA	Housing \| PC (Polycarbonate) \| Optical face \| PMMA
Interface type	IO-Link ( via C/Q = pin 4 )
IO-Link revision	1.1
LED risk group labelling	exempt group
Light source	LED
Light type	modulated visible red light
Mass	approx. 17 g
Min. cycle time	2.3 ms
Mission Time (T M )	20 a
MTTF d	600 a
Opening angle	approx. 5 °
Operation indicator	LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode
Optical face	PMMA
Process data width	Process data input 2 Bit Process data output 2 Bit
Product standard	EN 60947-5-2
Protection class	III
Reference target	H85-2 reflector
Reflector distance	0 ... 3.5 m in TEACH mode ; 0 ... 5 m at switch position "N"
Response time	1 ms
Signal output	2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
SIO mode support	yes
Switching type	The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally closed / light-on, PNP normally open / dark-on, IO-Link /Q - Pin2: NPN normally open / dark-on, PNP normally closed / light-on
Threshold detection range	6 m
Transfer rate	COM2 (38.4 kBit/s)
UL approval	E87056 , cULus Listed , class 2 power supply , type rating 1
Usage category	DC-12 and DC-13
Width	11 mm

Documents

No documents are linked to this part yet.