90058

Active

Inductive sensor

All alternatives

Technical parameters

Power
No-load supply current	I 0 \| ≤ 10 mA
Off-state current	I r \| 0 ... 0.2 mA
Operating current	I L \| 0 ... 100 mA
Operating voltage	U B \| 5 ... 30 V
Voltage drop	U d \| ≤ 1.5 V
AC and DC characteristics
Switching frequency	f \| 0 ... 6000 Hz
Time delay before availability	t v \| ≤ 100 ms
Environment and package
Ambient temperature	-40 ... 85 °C (-40 ... 185 °F)
Storage temperature	-40 ... 85 °C (-40 ... 185 °F)
Other
Actuating element	mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 8 mm x 8 mm x 1 mm
Assured operating distance	s a \| 0 ... 1.62 mm
CCC approval	CCC approval / marking not required for products rated ≤36 V
Connection type	Connector plug
Degree of protection	IP65 / IP66 / IP67
Diagnostic Coverage (DC)	0 %
Diameter	8 mm
Housing material	brass, nickel-plated
Hysteresis	H \| typ. 5%
Installation	flush
Length	55 mm
Length 55 mm Diameter 8 mm	Length \| 55 mm \| Diameter \| 8 mm
Mission Time (T M )	20 a
MTTF d	960 a
Number of pins	4
Output polarity	DC
Output type	NPN
Rated operating distance	s n \| 2 mm
Reduction factor r 304	0.75
Reduction factor r Al	0.4
Reduction factor r Brass	0.45
Reduction factor r Cu	0.3
Reverse polarity protection	reverse polarity protected
Scope of delivery	2 hex nuts included
Sensing face	LCP
Short-circuit protection	pulsing
Standards	EN IEC 60947-5-2
Standards EN IEC 60947-5-2	Standards \| EN IEC 60947-5-2
Switching function	Normally open (NO)
Switching state indicator	Multihole-LED, yellow
Threading	M12 x 1
Threading M12 x 1 Number of pins 4	Threading \| M12 x 1 \| Number of pins \| 4
UL approval	cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC Output Switching Current: 100 mA

Documents

No documents are linked to this part yet.