AP393AM8G-13

IC COMPARATOR 2 GEN PUR 8MSOP

AP393AM8G-13 is a dual-channel precision voltage comparator with a supply voltage range of 2.0V to 36V, typical supply current of 0.4mA, in MSOP-8L package. It supports single or dual supply operation and includes ground in the input common-mode range.Checked against the datasheet

Ask AI FAEDatasheet PDF

All alternatives

View full report

Technical parameters

Key specs

Elements2

Output typeOpen drain

Propagation delay300 nsTyp · VIN=TTL Logic Swing，VREF=1.4V，VRL=5V，RL=5.1kΩ)

Supply voltage2 ~ 36 V

Quiescent current1 mAMax · Max 1 mA (V+=5V，RL=∞)，Max 2.5 mA (V+=36V，RL=∞)

Datasheet-verified parameters

24 items

Parameter	Value and test conditions	Source
Channels	2
Output Type	Open Collector (Uncommitted collector of a grounded-emitter NPN output transistor)
Propagation Delay	Typ 300 ns (Large Signal Response Time, VIN=TTL Logic Swing, VREF=1.4V, VRL=5V, RL=5.1kΩ)
Supply Voltage	Min +2 V, Max +36 V (Single Supply); Min ±1 V, Max ±18 V (Dual Supplies)
Supply Current	Typ 0.4 mA, Max 1 mA (V+=5V, RL=∞); Typ 1 mA, Max 2.5 mA (V+=36V, RL=∞)
Package	MSOP-8L
Operating Temperature	0 to +70 °C
Grade	Commercial
RoHS	Compliant
Halogen Free	Yes (Green Molding Compound No Br, Sb)
Input Offset Voltage	Typ 4.0 mV, Max 8.0 mV (VCC=5V, TA=25°C)
Input Bias Current	Typ 150 nA, Max 400 nA (VCM=0V)
Input Offset Current	Typ 70 nA, Max 150 nA (VCM=0V)
Input Common Mode Voltage Range	0 V to V+ - 1.5 V (V+=30V)
Voltage Gain	Min 50 V/mV, Typ 200 V/mV (RL≥15kΩ, V+=15V, VO=1V to 11V)
Output Saturation Voltage	Typ 250 mV, Max 400 mV (ISINK≤4mA)
Output Sink Current	Min 6.0 mA, Typ 16 mA (VO≤1.5V)
Output Leakage Current	Typ 0.1 nA (VO=5V)
Absolute Maximum Rating - Supply Voltage	40 V
Absolute Maximum Rating - Differential Input Voltage	40 V
Absolute Maximum Rating - Input Voltage	-0.3 to +40 V
Absolute Maximum Rating - Power Dissipation	670 mW (MSOP-8L)
Storage Temperature	-65 to +150 °C
Thermal Resistance Junction-to-Ambient	Typ 208 °C/W (MSOP-8L)

All parameters (20)ExpandCollapse

Power
Current - Input Bias (Max)	0.4µA @ 5V
Current - Output (Typ)	16mA @ 5V
Current - Quiescent (Max)	2.5mA
Voltage - Supply, Single/Dual (±)	2V ~ 36V, ±1V ~ 18V
AC and DC characteristics
CMRR, PSRR (Typ)	-
Propagation Delay (Max)	-
Voltage - Input Offset (Max)	8mV @ 5V
Environment and package
Mounting Type	Surface Mount
Operating Temperature	0°C ~ 70°C
Package	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®
Package / Case	8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
Supplier Device Package	8-MSOP
Other
Base Product Number	AP393
Hysteresis	-
Mfr	Diodes Incorporated
Number of Elements	2
Output Type	CMOS, DTL, ECL, MOS, Open-Collector, TTL
Product Status	Active
Series	-
Type	General Purpose

Pinout and package

( Top View ) MSOP-8L/ SOP-8L — Package: **MSOP-8L**

Pin	Name	Function	Source
1		Channel 1 Output
2		Channel 1 Negative Input
3		Channel 1 Positive Input
4		Ground
5		Channel 2 Positive Input
6		Channel 2 Negative Input
7		Channel 2 Output
8		VCC

Documents

DatasheetDatasheet · 641.4 KB · 2026-11-09 DatasheetDatasheet · 236.8 KB · 2026-09-21 DatasheetDatasheet · 236.8 KB · 2026-09-21

Open document center

Datasheet-verified content is extracted by AI from the manufacturer datasheet. Click a page number to view the original.