EFR-012

Active

Der Hygrostat wird zur Vermeidung von Kondenswasser eingesetzt und überwacht die relative Feuchte in Schaltschränken und Gehäusen. Ab der Erreichung des eingestellten Wertes wird die Heizung eingeschaltet und die integrierte LED leuchtet.

See alternatives Ask AI FAEDatasheet PDF

All alternatives

View full report

Technical parameters

Power
Inrush current	16 A
Inrush current duration	10 s
Power consumption	1 W
Reference voltage	5 V
Reference voltage 2	120 VAC
Reference voltage 2 ohmic	120 VAC
Reference voltage dc ohmic	24 VDC
Reference voltage inductive maximum	240 VAC
Reference voltage ohmic	240 VAC
Switching current	5 mA
Switching current dc ohmic	4,2 A
Switching current inductive	1,6 A
Switching current ohmic	8 A
Environment and package
Height	64,5 mm
Mounting	Clip for 35 mm DIN rail, EN 60715
Operating temperature	0 °C - 60 °C
Storage temperature	-20 °C - 70 °C
Other
01245.0-00	40 % RH - 90 % RH \| 230 V
01245.9-00	40 % RH - 90 % RH \| 120 V
01246.0-00	65 % RH \| 230 V
01246.9-00	65 % RH \| 120 V
AC/DC	AC
Casing	Plastic to UL94 V-0, light grey
Connection	5-pole clamp: rigid wire/stranded wire with wire end ferrule 2.5 mm² (AWG 14)
Contact type	Relay
Depth	38 mm
Design	Changer
Device type	Hygrostat
Minimal switching capacity	0,3 W
Note	Switching resistive load (switching inductive load). Wire end ferrules must be used for connections with stranded wires.
Operating display	LED
Operating humidity	≤90 % RH
Protection type	IP20
Reaction time	5 s
Service life	>50000 cycles
Storage humidity	≤90 % RH
Switching capacity	8 (1.6) A (AC) ; 100 W (DC)
Switching differential	5 % RH
Switching differential tolerance	± 3 % RH
Torque	0,5 Nm max.
Weight	70 g
Width	42 mm

Documents

Open document center