onsemiUnited States

H11L1M

OPTOISO 4.17KV OPN COLL 6DIP

6-pin DIP Schmitt trigger output optocoupler, 4170 VAC RMS isolation voltage, 1 MHz data rate, open-collector output.Checked against the datasheet

All alternatives

3 alternatives on file. Sign in to view them.

16 items

Parameter	Value and test conditions	Source
Package	DIP 6-Pin
Input-Output Isolation Voltage	4170 VAC RMS, t = 1 Minute
Working Insulation Voltage	850 V Peak
Data Rate	1 MHz Typical (NRZ)
Output Voltage, Low	Max 0.4 V, R_L = 270 Ω, V_CC = 5 V, I_F = I_F(on) max.
Turn-On Threshold Current	Max 1.6 mA, R_L = 270 Ω, V_CC = 5 V
Turn-Off Threshold Current	Min 0.3 mA, Typ 1.0 mA, R_L = 270 Ω, V_CC = 5 V
Hysteresis Ratio	Min 0.50, Typ 0.75, Max 0.90, R_L = 270 Ω, V_CC = 5 V
Supply Current	Typ 1.6 mA, Max 5.0 mA, I_F = 10 mA, V_CC = 5 V
Detector Power Dissipation	150 mW
Output Current	50 mA
VCC Allowed Range	3 to 16 V
VO Allowed Range	0 to 16 V
Isolation Capacitance	Typ 0.4 pF, Max 0.6 pF, V_I-O = 0 V, f = 1 MHz
Isolation Resistance	Min 10^11 Ω, V_I-O = ±500 VDC, T_A = 25°C
Certification	UL1577, DIN-EN/IEC60747-5-5

All parameters (22)ExpandCollapse

Power
Current - DC Forward (If) (Max)	30mA
Current - Output / Channel	50 mA
Number of Channels	1
Voltage - Forward (Vf) (Typ)	1.2V
Voltage - Isolation	4170Vrms
Voltage - Supply	3V ~ 15V
AC and DC characteristics
Propagation Delay tpLH / tpHL (Max)	4µs, 4µs
Rise / Fall Time (Typ)	100ns, 100ns
Environment and package
Mounting Type	Through Hole
Operating Temperature	-40°C ~ 85°C
Package	Tube
Package / Case	6-DIP (0.300", 7.62mm)
Supplier Device Package	6-DIP
Other
Base Product Number	H11L1
Common Mode Transient Immunity (Min)	-
Data Rate	1MHz
Inputs - Side 1/Side 2	1/0
Input Type	DC
Mfr	onsemi
Output Type	Open Collector
Product Status	Active
Series	-

Pin	Name	Function	Source
1		Anode
2		Cathode
3		GND
4		VO
5		VCC
6		NC

Datasheet-verified content is extracted by AI from the manufacturer datasheet. Click a page number to view the original.